Magwa Posted July 6, 2013 Report Posted July 6, 2013 all parts ordered and have lower assembled a Franklin billet and it is sweet..... have a PSA upper blemished coming a 16 inch Gov't profile Mid length gas system barrel armalite clamp on FSB full length round handgaurds and some misc. parts just need to get them all here ... hope usps and ups do their part....
blue109 Posted July 6, 2013 Report Posted July 6, 2013 I just ordered a MOE rifle length for mine. Just trying to decide on using my A2 or flat top upper for the build.
Magwa Posted July 7, 2013 Author Report Posted July 7, 2013 I went with a flat top just because it offers more options I already have the carry handle rear site....
blue109 Posted July 7, 2013 Report Posted July 7, 2013 . Also thinking of trying that mini comp from brownells. Its only an inch long. Really emphasize the dissy.
unforgiven Posted July 17, 2013 Report Posted July 17, 2013 :wwop: Had to do it brother Mike,keyboard is posessed. <lmao>
Magwa Posted July 17, 2013 Author Report Posted July 17, 2013 (edited) OK here we go, How I did my Dissipator was I got a Billet lower from Franklin arms it is awesome has built in sling swivel recievers at back of lower and has dimppleing for trigger finger and in front of mag well I highly recomend this lower, After talking to brother 98 I decided to go with a mid lenght gas system, so I bought a blemished lower from PSA in Mid configuration, I then drove the pins out of the FSB and cut it down smoothed it up and painted it with stove paint high temp. then I reinstalled the gas block and gas tube, I used a triangle front grip ring and made a steel rod that would fit in the gas tube hole of my clamp on FSB I left about 1/4 inch sticking out ,I then drilled the rod thru the gas tube roll pin hole and pinned it in place now I can slide on the FSB put the pin in the hole in the for grip plate and everything lines up and stays that way. hope ya like it is works awesome and I love the full lenght sight picture, Thanks Tom for all the great advice and a big thanks to StainTrain for helping me out with a BCG I owe ya one.. Edited July 19, 2013 by Matt.Cross
Magwa Posted July 17, 2013 Author Report Posted July 17, 2013 BTW this forum is a PITA when it comes to removing a pic why is it such a pain... there has to be a easy way I just don't know it please remove one of the double pics .. thank you.
unforgiven Posted July 18, 2013 Report Posted July 18, 2013 Nice job brother Mike looks good. <thumbsup>
DNP Posted July 18, 2013 Report Posted July 18, 2013 (edited) OK here we go, How I did my Dissipator was I got a Billet lower from Franklin arms it is awesome has built in sling swivel recievers at back of lower and has dimppleing for trigger finger and in front of mag well I highly recomend this lower, After talking to brother 98 I decided to go with a mid lenght gas system, so I bought a blemished lower from PSA in Mid configuration, I then drove the pins out of the FSB and cut it down smoothed it up and painted it with stove paint high temp. then I reinstalled the gas block and gas tube, I used a triangle front grip ring and made a steel rod that would fit in the gas tube hole of my clamp on FSB I left about 1/4 inch sticking out ,I then drilled the rod thru the gas tube roll pin hole and pinned it in place now I can slide on the FSB put the pin in the hole in the for grip plate and everything lines up and stays that way. hope ya like it is works awesome and I love the full lenght sight picture, Thanks Tom for all the great advice and a big thanks to StainTrain for helping me out with a BCG I owe ya one.. Just delete it? Edit to add... Sorry, forgot to say sweet rifle! That's a nice one for the toy box. Edited July 18, 2013 by DNP
Magwa Posted July 18, 2013 Author Report Posted July 18, 2013 Thanks it was fun and I love building stuff and I do like simple and to the point...
DNP Posted July 19, 2013 Report Posted July 19, 2013 I didn't give you much info about fixing the post. If you hit the edit button, you should be able to go in and just delete the line that has the duplicate photo in it.
Magwa Posted July 19, 2013 Author Report Posted July 19, 2013 when I go to editor the pictures appear and there is no line between them I can not seperate the two pics to delete one.... like I said it is a PITA if it was image codes i could delete the code... I am scratching my head
Magwa Posted July 19, 2013 Author Report Posted July 19, 2013 Thank you ...I will get smarter one day lol
Magwa Posted July 19, 2013 Author Report Posted July 19, 2013 Next will be a 300blackout dissipator........ :))))))))))))))))))))))))
Robocop1051 Posted July 19, 2013 Report Posted July 19, 2013 Next will be a 300blackout dissipator........ :)))))))))))))))))))))))) In wood furniture!
Magwa Posted July 19, 2013 Author Report Posted July 19, 2013 Don't know about the wood the reason i started hunting with black rifles is no cracked scratched or broken wood i am hard on my toys .... :)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now