Jump to content
308AR.com Community
  • Visit Aero Precision
  • Visit Brownells
  • Visit EuroOptic
  • Visit Site
  • Visit Beachin Tactical
  • Visit Rainier Arms
  • Visit Ballistic Advantage
  • Visit Palmetto State Armory
  • Visit Cabelas
  • Visit Sportsmans Guide

Sisco

Specialist
  • Posts

    6,631
  • Joined

  • Last visited

Everything posted by Sisco

  1. Nice! It will be a kickass emplacement rifle. Any thing over 12 pounds is an emplacement rifle for me nowadays.
  2. Sisco

    Grilling

    Tried a different fish fry batter tonight. Supposedly Long John Silver's restaurants recipe. Did my traditional one and the new one. Liked them both though each is different. Silvers is at the top of the pic.
  3. A really nice picture of an Enfield bullpup rifle and some English woman getting ready to pull the trigger.
  4. Don’t know all the background, but a Man’s home is his castle.
  5. Well the local tacticool arbiters of what is the latest and greatest probably won’t ever talk to you again and will pack up and leave when you pull your rifle out of the case, leaving you the nice, quiet range all to yourself. I have done that on my Colt HBAR for almost 30 years. No problem.
  6. Sisco

    Grilling

    Don’t let them on to what they are missing. Mix short rib meat/fat with equal parts chuck roast and grind it up. Best hamburgers of your life.
  7. Sisco

    Grilling

    This. Invest in a good knife. For thin slicing get a Japanese Sushi/Shashimi knife. I dumped my electric meat slicer after I got mine.
  8. Northern lights have been crazy this week.
  9. Had a little problem with my chrono so did not get the MV off the AR10T. Sighted in beautifully on just five shots at 100 yards, however. Some noob was hogging both 185 yard benches with a dozen ammo boxes and six rifles.
  10. Yeah, good stuff. Will be shooting some tomorrow as a control for my reloads. Interestingly enough also in a 16" AR10T.
  11. I will after I make the switch. I will bring my chronograph with when I sight it in. I haven’t charted my latest reloads out of this rifle yet. I am using Remington brass with 41.5gr IMR 4895 with Hornady 168gr ELD-X bullets.
  12. Decided to stick with putting it on the AR10T. The PA 1x6 now on it is a fine scope, but the recticle doesn,'t work well with my old eyes for distance target work. The 1x6 will find a better home on my Diamondback 5.56 AR.
  13. Had an older Arsenal 27 myself in 7.62x39.The milled receivers are superior. The accuracy is so much better as much due to the extra pound of weight as anything, though I am sure the rigidity helps. It is a tool, and like any tool, when used within its design parameters it is useful. It has a good home now where it is used and valued.
  14. Just picked up a PA 4x14 from the for sale section. My original intent was to put it on my AR10-T carbine. Now I am thinking of two other candidates: My Springfield M1A loaded currently has a Burriss Fullfield II 3x9Xon it and my Colt 5.56 HBAR has a Firefox 1x6X Front Focal Plane MilDot scope on it. The HBAR gets fed a diet of 75gr. BTHP exclusively, the M1A 168gr and 175 gr. BTHP exclusively, like the AR10T. Decisions, decisions.
  15. 👍🏻Thank you!
  16. Taking a PA 1x6 off my AR10T carbine, as the rifle outperforms the limits of the scope. Putting on a PA 4x14 and moving the PA 1x6 to my DiamondbackAR15 carbine. So I would agree with Edgecrusher,
  17. I have always had good luck with PMC brass. I would take the time to fill one with water and weigh it on a digital scale both full and empty to check the internal volume. If you have a Lake City M-80 brass you can compare it to so much the better. Or the brass used in a reloading manual. That will give you an idea if you are at a similar internal volume. If I remember correctly, I found PMC brass weighed slightly more and had slightly less internal volume, which meant more brass for strength but slightly higher pressures. Don’t depend on my recollection though, check it.
  18. The first man to homestead land in 1863 in the United States, in Nebraska. I think Mr. Freeman was a tough customer, don’t you?
  19. Yes you can, but I would seriously consider taking it to an experienced firearms dealer and find out it’s worth to collectors. I think you could pick up a nice carbine plus have some additional pocket money if you chose to sell it. Just my opinion. I have an HBAR and modified it. I would have been money ahead if I had sold it instead.
  20. Exactly
  21. Well You all Beef Hooked Laddie
×
×
  • Create New...