shooterrex

The pyrs all wanted in the house. They didn't like the wind either.

Sounds like they have most of it right.

Power back on about an hour ago. Lost a small fainting goat. The little shelter (dog house like) blew over and he got squished. Wind is down to about 25 mph now. We trimmed trees around the house 3 weeks ago. So nothing was damaged that way. I'm sure we will find stuff blowed all over everywhere tomorrow.

Thunderstorms rolled through then 60-75mph winds behind the tstorms. Power outage all over the place. Might need to start the generator if it's not back on shortly. Only been out a bit over an hour. Cooked burgers on the grill for supper. Wind is so strong the gate opener wouldn't open the gate against the wind. Had to take the opener loose and block the gate open. The wind is supposed to keep blowing like this till 10pm. Glad I'm not a lineman trying to fix the power lines.

Batten down the hatches. We are supposed to get that tomorrow.

That I do not know.

Yes the bolts are different.

Not sure of the brand. It was in my parts box. It is standard ar carbine length pistol tube.

Probably a better barrel here. https://www.ballisticadvantage.com/12-5-308-tactical-government-carbine-length-ar-308-barrel-modern-series.html

80 deg

By the top pic the tube needs to go one more turn. It's just barely catching the buffer detent. However since the tube is squared off on the end that will not work. Here are pics of a tube that would go one more turn and not stick out where the receiver would close.

Good effective muzzle brake.

From what I can find the 22-250 and 308 case head is the same. So changing out the barrel is about it. You might need a different magazine.

The square face ejectors seem to mess up feeding from the right side of the magazine on some guns.

You are also dealing with a BCG that is not really broken in yet. The problems being about every other round kind of points to the square ejector.

This will be in court for years.

Please start your own thread about your gun. Please search the Waterboarding thread and read that. Then list all the info the waterboarding thread asks for. There is no way to help you fix your gun without the exact info of your build. These guns are not milspec.. you can't just buy parts and throw them together and expect them to work without a ton of research.

If you change the ejector to the rounded one I bet it straightens up.

Yep Wilson has decided to make up their own lengths on gas tubes. That needs changed out. I'm betting you need to open the gas port in the barrel a few thousandths.

Define Luth recoil system. Rifle? Carbine? What weight and length buffer? There is a thread called Waterboarding. That is the kind of information we need to help you fix your gun.

73 deg today but windy. 40 mph wind.

Crenshaw was a supporter of the bump stock ban.

HK 91/G3 have fluted chambers.