98Z5V

Isn't a binocular chest rig kinda like a bra, for outdoor manly men? I'm just ASKING, brother...

I'm pretty positive that I've used my MagPul wrench on the last two Aero large-frame builds I've done. I could pull a rail and double check.

I'm getting regular emails from them now, just frmo being a past customer. I can look the new people up. Makes me want to talk to Bob and Sherrie, though... When you hit the old website, it's now "Mernickle Holsters by Howlin' Wolf Leather"

The main port in any gas block is usually slightly larger than you can ever go in the gas tube itself. The largest hole a gas tube can have (the gas inlet) is 0.125", and that's because it's diameter restricts the size to that. Any larger, and you're into the sides of the gas tube. You jut can't go over 0.125", unpossible (unless serious custom gas tubes and blocks are being hand-machined).

Great find, brother!

Fuckers.... The whole lot of you...

Here's another way to think about it, Jeff - think about this for your own stuff, too. His recoil spring isn't gonna last forever, and it's gonna need to be replaced one day. Where is he gonna find that weird AR15 spring he's running now, or whatever it is?... In the future, he'll always be able to get another Sprinco orange spring as a replacement, and it'll be made to the exact same standards that it's made to right now, today. If he takes the time to make his run right, right now - he'll have a WAY easier time with his gun in the future, when he needs replacement parts. If he ups that gas port now, while he's got the time, and he puts that Orange spring in - and the gun runs great... life will be much easier down the road, when springs start wearing out. So will your life, if you take the time to get your guns set up right. Where did all your recoil springs come from? I can tell you what company's recoil spring is in every one of my ARs, brother. And I know where to get them in the future, too. OP, why stop now? You already have the Orange spring. Why stop, when you're so close to having the gun right? Just because it's "functioning?" It's functioning with a gas port that's too small, and you proved that by swapping in a weaker recoil spring to get it to run and function. You're a numbered drill bit away from having that gun right, not half-assed.

Again, not true brother - Those orange springs are directly for .308AR rifles, running the 7" extension and 2.5" buffers, and Sprinco directly states that. That spring description I posted above was directly from Sprinco's website. Check it yourself... If he wasn't his gun almost right, though it's running now on the ammo he has, that's up to him. One day, he'll find the ammo that doesn't run right in it. With you running around saying they're only for heavy-gassed rifles, some fool in the next few months is going to try to argue that mis-information, and say that he saw it right here on this board.

DAMN BROTHER!!!

That's entirely up to you. If it was mine, I'd make it right. You might find some brand of ammo sometime that doesn't cycle your gun well. Trying to figure out what that ammo is, is purely guesswork, until you buy something that doesn't run right.

Are you still using that weaker recoil spring, man? And the gun won't run with the correct spring in it?... The Sprinco Orange spring is the correct spring that you should be running for your configuration.So, if it doesn't run with that in there - your gas port is still too small... That making sense? That make sense to you @washguy?...

Hey brother, I just want to point out that what you stated up there ^^^ is completely incorrect. The Orange spring is not designed for seriously overgassed .308ARs, in the least. It's designed as the standard replacement spring for a .308AR running a 7.000" internal depth extension and a 2.500" buffer. Here's exactly what Sprinco has for the Orange spring description: " Tactical Springs LLC .308 M4 CARBINE Extension Tube EXTRA POWER Moly-Plated Chrome Silicon Buffer Spring in Hard Tube (Color Coded ORANGE) [NOTE: Originally Developed for .308 CARBINE Platforms Utilizing Standard 7" Depth M4 Carbine Extension Tubes with Short Buffers. E.G. DPMS/Bushmaster, Etc., but are Often Appropriate for any Severely Over Gassed Carbine of Similar or Lesser Calibers] " ^^^ That's exactly copied from their description of the spring. So, to say that it's only for severely overgassed .308s is not accurate in the least. It's for ALL .308s that meet the criteria (7.000" extension running 2.500" buffer), and it's ALSO good for severely overgassed cabines of similar or lesser caliber. The Sprinco RED Spring would be for a seriously overgassed .308AR running a 7.000" extension and a 2.500" buffer...

Once you get the chance to leave, man, just don't drag that Jersey Attitude with you. Others that left before you never quite understood this, but the only place that bullshiit attitude is tolerated- is back in Jersey. Nobody else puts up with that shiit... Leave it back there, and thankfully, it sounds like you lost it already. It only works there, nowhere else...

Everybody there - that leaves that state to come to others - tries to act like they're all "Jersey Shore" and Fakeass Mafia, IMHO. I've run into a bunch of "you people" outside of your state, and they all think they're Mafioso badasses. It's the image that they think that they can take anywhere, and it doesn't always work out too well for them. Big mouth, East-Coast center of uranus that "knows everything and always has a connection" doesn't always get them by, in the south west. I've seen alot of those big-mouths take as ass-beating because of their mouth, and attitude. "Jersey Tough" doesn't mean that you're really tough, as alot of them have found out. That Big Mouth can't talk you out of as ass-whippin'... That's not against you, Pete - that's just aainst the assheads that migrate out of your state, to other states, and think that they can takethat fake-ass attitude with them and "make it the norm" where they go. It doesn't always work out for them Big Mouth Jersey fuktards.

Welcome, Pete, and thanks for the intro. You're in a rough spot, in your state, and there are only a few of you here, over the years. Tough place to be, as a gun owner.

It will make no difference. That's why Armalite designed it that way. the AR-10 Carbine and Ar-10 Rifle recoil systems perform the same. You can even save money - don't buy a recoil spring - it's the very same recoil spring in the carbine and rifle recoil systems, the EA1095 spring. You just need the rifle receiver extension and rifle buffer (5.200" rifle buffer, not AR15 shiit). Go hit the Intro Section and tell us about yourself.

Vet TV is twisted, brothers. Military-twisted. If you can get that humor, and you weren't .mil - then you're just fucked up. .mil guys have a reason for getting it... All the rest of you bastards, though... that's the very reason you're here in the first place, you sick fuckers...

I'll bet wash has fresh-smoked rib meat hanging out of his fangs when he went into the store... Full Zombie Wash...

Fucking Savage, is what you are. I like it, you rude bastard...

^^^ That thing is perfection, right there, for a carry gun. I wouldn't mill that slide for anything. Just buy a Glock with the slide already milled, and beat the fuk out of it daily, run over it with your car on accident, it won't care. I can't believe I just gave that out as an opinion. I turned into a Glock-Fag...

Yeah, hit some Vet TV...

Hang in there, man - something is going to turn up. Don't ever quit...

That's why I'm posting it, brother.

NICE, BROTHER!!! I'm not gonna lie about it, not even a little - I'm jealous of your canning skills...