98Z5V

Packing the truck now - truck change, too - the little Nissan.

They'll take care of you - how far in was that lump?

As far as I know, Drew didn't push this - he's been fucking AWOL for a great while now. He needs his nuts scrunched for being AWOL, but he'll never be held accountable for that. He's WAY TOO SEXY... :banana: :ove3: :love4: Drew, love you bro, but if I don't hear from you soon, I'll burst out of your fridge at midnight, and man-rape you right on the spot. No mercy, no lube. It goes just like that. Dry. :eek:

fornicate, i have the borescope on-hand now, and can provide videos for them. I don't know how deep they need, but I have an 18" attachment. Matt, talk to me about what you want. :eek: <laughs>

There is NO MOTHERFUCKING WAY that we can have our board-sponsored C-130 pilot that is some dude we can blindfold with a fucking piece of dental floss. There's NO way. NO Asian Eyes. You need to get the "American Eye Procedure" completed before you ever elicit that position. You go Round-Eye, or you GO HOME, GI... <lmao>

I can give you guys a spreadsheet. They're everywhere.

I'm wondering if the PWS tube is too long - and how individuals measure. 7"internal depth is the AR-15 standard, and what you need to have for your setup. It's odd that you say another receiver extension is 6 7/8". That's the difference right there, and shows that no two people measure the same, unless both know "precision measurement." No offense - but i don't know of ANY receiver extension out there that has a 6 7/8" internal depth. I think this PWS super-tube is off. That's the operating system, and how it's supposed to work, and why there's a bumper on the end of the buffer. It slams into the back of the receiver extension, by design. It slams into the back of the receiver extension on a 308AR REALLY HARD when your gas system is all fucked up. Too much internal depth is causing that. Too much distance. 1/4" over-travel of the BCG is way too much. That's what breaks bolt stops/bolt catches. Reduce it. Stack quarters, or machine another thing that you machined - but longer. If you stack quarters, you can measure the thickness of a quarter, count those quarters, and add that thickness to your spacer that you machined. People might laugh at my suggestion, but it works. $1.75 is the magic number on a 9mm AR. Done. Didn't machine $hit, and lost $1.75 into the receiver extension. And they cycle. You don't need the carrier to be shorter - that's a standard, even when there's "no standard for 308ARs" - that is a standard. You don't need a shorter carrier - you need less internal depth on your receiver extension, to prevent your carrier from slamming into your lower. You're not fucking listening to the information that's being presented to you. It's time to start listening...

I need to tell stories about mooselimb axe-tremists around military installations. There are concentrations of that community near installations. We recruit from those population density concentrations. I could go on and on.

Nothing - Shibi owes beer, though... <lmao>

Start with a Storm Lake threaded barrel for the XD. The USP is already threaded, correct?

Yep, and after that, if their $hit is right, that's when you get to slap them on the a$s... :happydrunks:

^^^ He has a boner... <lmao>

What kinda crazy $hit is THAT?!!? <lmao> Congrats, brother - I hope she didn't miss with the scissors, and hit that "other hair..." <laughs> :yup:

The Navy SEAL Community will take care of this problem. Rest assured, they will. <thumbsup> Local Law Enforcement, for whatever community that sign is recovered from, will probably never get a report or call about it. It will just appear back at that farm. Somebody will REALLY be moving slow for a few days afterwards. VERY slow. Hopefully, it's a whole group of slow moving people. They're gonna get lumped up.

Gets printed and taped on the computer monitor at work on Saturday, for the weekly meeting. I'm sure questions will arise, but the fucking answer is self-evident... <lmao>

SUNDAY, 12 APRIL. DESPITE WHAT THE THREAD TITLE SAYS. SUNDAY, 12 APRIL.

Adam O needs to get his a$s out for this. Big time. I'll call Taz tomorrow - I can draw him out, and he's one hell of an addition to the antics. i'll get him spun up and release him, and $hit will break loose. I ain't kidding. Meet location: Address: 41650 W Maricopa-Casa Grande Hwy, Maricopa, AZ 85138 Look for a green 1998 Dodge Ram 1500. Loaded to the gills, and above the bedline. :hethan: I raided Shib of some lowers yesterday, too. Couldn't post that in any of Ed's 20 topics of $hit in the mail, ordered for mail, received from mail, stalked the mailman, fantasized about the mailman threads. Didn't fit, as it was local pickup from my gun-pusher. :))

That buffer detent hole isn't the issue here, or you would see this type of damage.

Then the machined hole for the buffer retainer is in the correct position. Look elsewhere for the problem/solution, and don't waste anymore time on that recommendation. if that hole was out of place, it would fuk your buffer all up around the edges, like this pic below. The Tubb CWS will not cure the problem you're seeing here. Your receiver extension is too deep, your buffer is too short, or you have the wrong spring in there. Stacking quarters will tell you if you can fix it.

Tubb CWS will add 0.080" to the length of the BCG. If your buffer face isn't chewed up, that's not the problem, though. Post a pic of the buffer face for confirmation. Stack a couple quarters in the receiver extension, then insert spring, buffer, etc. See if that solves it. If you can't lock the BCG back by hand, then remove one of them. See if it works. 2nd time I've seen this with the PWS extension, in just a couple days here.

Rappel Master reference, or Jumpmaster reference. The Rappel Master answer is my favorite, and I used it on a girl just a few days ago... <lmao> STAND, TURN, BEND AT THE WAIST, AND PUT YOUR BRAKE HAND ON YOUR KEVLAR!!! She LOVED it!!!... :hethan:

You're good, by far. It's certainly 'quality over quantity," and you've got the content thus far to just reach out and fuk someone up. <lmao> Chase needs it anyway, for being a P USSY... <dontknow> <laughs>

It's not a new or unknown issue - it's just the first time you've seen mention of it on this board. Welcome aboard, Newb. <thumbsup> The OP - who is not a "Big AR" new guy - even opened up his first post with this statement: Gentleman. Just bought my 10th armalite and ran into what im told is a common issue. Glad you're here. Carry on, now...

Heads will roll over this - from an ATF standpoint, it's gotta be pretty exciting. This is classic "don't EVER do this!..." schit.

speaks the truth he does. please don't Yoda-speak eveyrthing you want, or fucck you up we will on your requests. Yoda-speak here equals asss-we-will fuk we will, when you waaant-information you do. just thought i'd let that hint out there.