Boot_Scraper Posted January 5, 2019 Report Share Posted January 5, 2019 (edited) Well boys n girls, it ain't anudder 308 but, same difference. Three hundred and fifty eight thousandths x 180 grains of shut the fuq up, hurled at about 2500-2600 FPS, packed into an AR15. Dis gone be fun!! I've started to compile parts and rummage through my gun box. I was surprised to find just how much spare shyt I had already. So far we got: Aero Precision M4E1 upper and lower, Brigand 9" Blade (yeah I know), Ace ARFX stock (pulled from the PA10, PA10 will be getting a Magpul fixed rifle stock). Still to come: LaRue MBT-2S, PRI 6.8 mags, and an Armaspec SRS. I got a good bit of LC brass that'll need trimming and forming. I contacted the fella who sells the 358 kits and he says they should have more at the "end of winter". Now we wait. I'll keep ya'll posted. I gotta say, these M4E1's are a great buy. Very nice set. Go Aero! Not my pic: Edited January 5, 2019 by Boot_Scraper Quote Link to comment Share on other sites More sharing options...
shepp Posted January 5, 2019 Report Share Posted January 5, 2019 30 minutes ago, Boot_Scraper said: Kinda Wierd I had a dream I won somthing that looked exactly like this and it was mail to me but the lower took a .22 mag. Yea I know strange, I have weird damn dreams Quote Link to comment Share on other sites More sharing options...
Sisco Posted January 5, 2019 Report Share Posted January 5, 2019 23 minutes ago, shepp said: Kinda Wierd I had a dream I won somthing that looked exactly like this and it was mail to me but the lower took a .22 mag. Yea I know strange, I have weird damn dreams Regular sex will do that to you. Quote Link to comment Share on other sites More sharing options...
shepp Posted January 5, 2019 Report Share Posted January 5, 2019 26 minutes ago, Sisco said: Regular sex will do that to you. Nah they’re always fucked up, but maybe ??♂️ Quote Link to comment Share on other sites More sharing options...
Ravenworks Posted January 5, 2019 Report Share Posted January 5, 2019 (edited) God I'll be glad to get out of this cold weather. I'm to the point I'm just going to build some uppers for now and have been looking at this on and the Grendel. Freezing my ass off in the garage smoking. Edited January 5, 2019 by Ravenworks Quote Link to comment Share on other sites More sharing options...
Ravenworks Posted January 5, 2019 Report Share Posted January 5, 2019 Quote Link to comment Share on other sites More sharing options...
Boot_Scraper Posted January 5, 2019 Author Report Share Posted January 5, 2019 Don't do it man Quote Link to comment Share on other sites More sharing options...
Ravenworks Posted January 5, 2019 Report Share Posted January 5, 2019 . Quote Link to comment Share on other sites More sharing options...
Ravenworks Posted January 5, 2019 Report Share Posted January 5, 2019 How and the fuq did I get 3 post in one? Quote Link to comment Share on other sites More sharing options...
Boot_Scraper Posted January 5, 2019 Author Report Share Posted January 5, 2019 1 minute ago, Ravenworks said: How and the fuq did I get 3 post in one? What kinda cigarettes ya smoking? Quote Link to comment Share on other sites More sharing options...
Ravenworks Posted January 5, 2019 Report Share Posted January 5, 2019 Marlboro, I gave up Vaginal Slims when I had my operation Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 5, 2019 Report Share Posted January 5, 2019 2 hours ago, Boot_Scraper said: I contacted the fella who sells the 358 kits and he says they should have more at the "end of winter". Now we wait. I'll keep ya'll posted. I gotta say, these M4E1's are a great buy. Very nice set. Go Aero! Lemme know - I'm sure it'll be posted. I'm interested in this platform - thanks to you... Yes, the M4E1 sets are perfect - I love them. Quote Link to comment Share on other sites More sharing options...
Boot_Scraper Posted January 5, 2019 Author Report Share Posted January 5, 2019 4 minutes ago, 98Z5V said: Lemme know - I'm sure it'll be posted. I'm interested in this platform - thanks to you... Yes, the M4E1 sets are perfect - I love them. Yes, paybacks a bitchh Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 5, 2019 Report Share Posted January 5, 2019 What a fuqr... Quote Link to comment Share on other sites More sharing options...
Armed Eye Doc Posted January 5, 2019 Report Share Posted January 5, 2019 48 minutes ago, 98Z5V said: What a fuqr... Says the man who caused me to build a Grendel. Lol Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 5, 2019 Report Share Posted January 5, 2019 (edited) 15 minutes ago, Armed Eye Doc said: Says the man who caused me to build a Grendel. Lol All I did was say, "You wanna shoot this one, brother?... Just hold 3 mils on that target at 500, and you're there... " Edited January 5, 2019 by 98Z5V Because editing makes basement dwellers FUCKING CRAZY!!! Quote Link to comment Share on other sites More sharing options...
Boot_Scraper Posted January 5, 2019 Author Report Share Posted January 5, 2019 You fqers doubled the cost of my last build? Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 5, 2019 Report Share Posted January 5, 2019 (edited) 16 minutes ago, Boot_Scraper said: You fqers doubled the cost of my last build? No, we didn't.We helped you make one LIGHTASS BUILD, brother. Ground Truth. I know it hurts, to hear that, but it is what it is... Remember... YOU asked for that... Edited January 5, 2019 by 98Z5V EDITED because YOU asked for that... LMFAO Quote Link to comment Share on other sites More sharing options...
Boot_Scraper Posted January 5, 2019 Author Report Share Posted January 5, 2019 (edited) 6 hours ago, 98Z5V said: No, we didn't.We helped you make one LIGHTASS BUILD, brother. Ground Truth. I know it hurts, to hear that, but it is what it is... Remember... YOU asked for that... All good my friend! You are correct, that thing would've been some kinda fuct up expensive ass PA10 half breed labradoodle without y'all's guidance. (I blame @washguy mostly) It's better this way! The Yeti will be no different. Edited January 5, 2019 by Boot_Scraper Quote Link to comment Share on other sites More sharing options...
shepp Posted January 5, 2019 Report Share Posted January 5, 2019 3 hours ago, Boot_Scraper said: (I blame @washguy mostly) NO NEVER!!! ????? Quote Link to comment Share on other sites More sharing options...
washguy Posted January 9, 2019 Report Share Posted January 9, 2019 Me? no way.......Dikstroker that's the guy to blame...all my $hit is heavy! 358 yeti ....im in Wash Quote Link to comment Share on other sites More sharing options...
dpete Posted January 16, 2019 Report Share Posted January 16, 2019 We need to come up with a 358 Yeti group buy when the barrels and bolts come available Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 16, 2019 Report Share Posted January 16, 2019 (edited) 19 minutes ago, dpete said: We need to come up with a 358 Yeti group buy when the barrels and bolts come available I'm in for that - is that how we get them available again? I'm down with it. Cut a .308 Win case DOWN, then neck it UP to .358", and it fires from a 5.56-based gun?!!? Fuk yeah, I'm in... This is a 300BLK on fucking steroids... Edited January 16, 2019 by 98Z5V Quote Link to comment Share on other sites More sharing options...
dpete Posted January 16, 2019 Report Share Posted January 16, 2019 (edited) 26 minutes ago, 98Z5V said: I'm in for that - is that how we get them available again? I'm down with it. Cut a .308 Win case DOWN, then neck it UP to .358", and it fires from a 5.56-based gun?!!? Fuk yeah, I'm in... This is a 300BLK on fucking steroids... Thats for sure. As if I need another rifle to swat deer at the 50 yards or less range we get shots at around here. But it would still be fun and I have an almost unlimited supply of 308 cases to play with. I do believe you cut the 308 case DOWN just below the shoulder, then neck the now almost straight walled case DOWN to .358 Edited January 16, 2019 by dpete Cuz I can and I learned to do it from the best Quote Link to comment Share on other sites More sharing options...
98Z5V Posted January 16, 2019 Report Share Posted January 16, 2019 8 minutes ago, dpete said: I do believe you cut the 308 case DOWN just below the shoulder, then neck the now almost straight walled case DOWN to .358 From what I've been able to find, you are exactly right. And you fire this from a 5.56-based gun. I'm all over this... How the hell do we get a bolt strong enough, in a 5.56 gun, that will support a .308 case?!... At this point, I don't care, I just want to build one, and make a Super 300BLK out of the damn thing... 500 Blackout is coming, too. Just so you guys know. It's a reality. It's a done deal. I'm just sayin'... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.