shooterrex Posted September 19, 2020 Report Posted September 19, 2020 I bought a Bear Creek Armory complete 6.5 Creedmoor upper knowing I would probably need to replace their barrel. Wilson Combat 16" Paul Howe barrel is now installed. Bushmaster 308 lower LaRue MBT trigger Nada Zero impulse 308 muzzle break Armalite rifle recoil system and stock Bushnell AR series scope. All targets are at 86 yds. Seems to like the cheap Winchester. Hornady American Gunner just rocks.
Armed Eye Doc Posted September 19, 2020 Report Posted September 19, 2020 That's not proof that it shoots well. You should send it to me so I can extensively test it over the next 12 to 24 months. Of course, you will need to supply me with a monthly case of ammo while I am testing out your rifle.
shooterrex Posted September 20, 2020 Author Report Posted September 20, 2020 39 minutes ago, Armed Eye Doc said: That's not proof that it shoots well. You should send it to me so I can extensively test it over the next 12 to 24 months. Of course, you will need to supply me with a monthly case of ammo while I am testing out your rifle. You can shoot it in November.
Armed Eye Doc Posted September 20, 2020 Report Posted September 20, 2020 1 minute ago, shooterrex said: You can shoot it in November. Excellent!
Belt Fed Posted September 20, 2020 Report Posted September 20, 2020 You going to hunt with it, the CM is an awesome deer cartridge. Nice rifle and shooting
shooterrex Posted September 20, 2020 Author Report Posted September 20, 2020 (edited) 1 hour ago, Belt Fed said: You going to hunt with it, the CM is an awesome deer cartridge. Nice rifle and shooting Might hunt with it. Still liking my Grendel for white tails around here. I built this to take to the fall shoot in AZ. Something that shoots flatter than a 308 for long distance. Edited September 20, 2020 by shooterrex spelling
98Z5V Posted September 21, 2020 Report Posted September 21, 2020 DAMN!!! THAT THING JUST WORKS!!! Ya done WELL on that gun, man - VERY WELL...
billymagg Posted September 25, 2020 Report Posted September 25, 2020 On 9/19/2020 at 6:08 PM, shooterrex said: I bought a Bear Creek Armory complete 6.5 Creedmoor upper knowing I would probably need to replace their barrel. Wilson Combat 16" Paul Howe barrel is now installed. Bushmaster 308 lower LaRue MBT trigger Nada Zero impulse 308 muzzle break Armalite rifle recoil system and stock Bushnell AR series scope. All targets are at 86 yds. Seems to like the cheap Winchester. Hornady American Gunner just rocks. That Wilson Barrel is the bomb! Nice shooting...
98Z5V Posted September 25, 2020 Report Posted September 25, 2020 2 hours ago, billymagg said: That Wilson Barrel is the bomb! Nice shooting... All Wilson Combat barrels are Da Bomb, brother. They don't make a bad one.
shooterrex Posted September 25, 2020 Author Report Posted September 25, 2020 Just ordered another 200 rnds of the Hornady American Gunner.
billymagg Posted September 25, 2020 Report Posted September 25, 2020 11 hours ago, 98Z5V said: All Wilson Combat barrels are Da Bomb, brother. They don't make a bad one. I concur sir!, they just want to shoot, and they make you want to shoot...
billymagg Posted September 25, 2020 Report Posted September 25, 2020 11 hours ago, shooterrex said: Just ordered another 200 rnds of the Hornady American Gunner. Awesome, Wilson Combat is expecting a large shipment of 5.56, 45 ACP, and 9 mm, so now is a great time to stock up..., I'm on board with Hornady all the way. The first handgun deer I ever took was with their 240 Grain XTP, amazing stuff, exit wound looked like a shotgun slug.
shooterrex Posted October 5, 2020 Author Report Posted October 5, 2020 The creedmoor started leaving the fired brass in the chamber with the next round partially chambered. Ran fine for about 150 rounds then not so much. I changed bolts to one from Brownells that I know works in my 308 pistol. Back to running as it should. The ejector in the original bolt is squared off and the one in the Brownells bolt isn't. I have ordered KAK ejectors for the 3 bolts I have w/squared off ejectors.
98Z5V Posted October 5, 2020 Report Posted October 5, 2020 19 minutes ago, shooterrex said: The creedmoor started leaving the fired brass in the chamber with the next round partially chambered. Ran fine for about 150 rounds then not so much. I changed bolts to one from Brownells that I know works in my 308 pistol. Back to running as it should. The ejector in the original bolt is squared off and the one in the Brownells bolt isn't. I have ordered KAK ejectors for the 3 bolts I have w/squared off ejectors. This is new developments - start a new thread on this stuff, brother... Capture all the details...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now