imschur Posted March 8, 2012 Report Posted March 8, 2012 I was pondering a 10mm AR-15 for a while but the economics of having yet another caliber and an expensive one at that just didn't make sense. Then Tom posted his Olympic Arms build. That was all it took, I was sold. I ordered an OA dedicated upper and 4 mags. Got a Spikes receiver set all assembled with a Rogers Super Stoc. I decided to try one of those inexpensive JP trigger kits given this weapon isnt for serious target work.Tom nearly convinced me to go with a dedicated lower but they are pricey and I like the idea that this spikes can be a spare. I just need to order a Bad ASS and Ill be good to go. Most likely Ill change the handguard but my thoughs are at two ends of the price spectrum. Im thinking either a MOE or a DD OMEGA <laughs> Lastly next month I will order a YHM Wraith Suppressor for it. (I hope)Pictures as soon as the upper arrives.
imschur Posted March 20, 2012 Author Report Posted March 20, 2012 Just got word my upper shipped. Feels strange buying something someone else put together
imschur Posted August 7, 2012 Author Report Posted August 7, 2012 Just waiting on a YHM WRAITH Suppressor
Matt.Cross Posted August 7, 2012 Report Posted August 7, 2012 Those babies look fine! So uh, when do we get to see vids of them in action? <munch>
imschur Posted August 7, 2012 Author Report Posted August 7, 2012 Cant decide on sights and or optics. Im having issues with my eyes :(
98Z5V Posted August 7, 2012 Report Posted August 7, 2012 Just got word my upper shipped. Feels strange buying something someone else put together I hear ya on that - when mine came in, I had to take it apart and change something, just so I felt better... :oYou did a FINE job with it. <thumbsup>
imschur Posted August 7, 2012 Author Report Posted August 7, 2012 This thing gave me some trouble with upper/lower fit.
98Z5V Posted August 7, 2012 Report Posted August 7, 2012 Mine dropped right onto the Aero Precision lower, no issues - had to be that old-skool Oly lower that was doing it. I've got a 2003 Oly lower (and upper) that I have to tap the takedown pin into, once the pivot pin is locked. That same upper drops right down on other lowers I've got. It's definitely something that they do with their lowers, and I swear I read somewhere that they do it for a tight, "no-slop" fit... PITA sometimes... Sights and optics... Since it's a .45 ACP round, and it's not going to win any long distance competitions, I figured mine was good for 150 yards, though I've stretched it out to 200 yards. I used a mini red dot setup from Primary Arms, in the American Defense QD mount, with MagPul flip-ups. <thumbsup>It's a thought... <dontknow> <laughs>
dprice38444 Posted April 15, 2015 Report Posted April 15, 2015 bazooka brothers dedicated 45 acp using modified grease gun mags. mech-tech systems uses glock lowers attached either 9mm,40 cal,10mm,45 etc.
MikedaddyH Posted April 15, 2015 Report Posted April 15, 2015 Another thread back from the dead ! Drew did you ever shoot this ? I wanna range report !
98Z5V Posted April 16, 2015 Report Posted April 16, 2015 (edited) bazooka brothers dedicated 45 acp using modified grease gun mags. mech-tech systems uses glock lowers attached either 9mm,40 cal,10mm,45 etc. Not gonna do it. Not this time. Instead, I'll take a different approach. Hey, dprice, there's a much better dedicated setup out there than the bazooka brothers running modified grease gun mags. CNC Guns does a dedicated lower that uses stock, standard grease gun mags. Unmodified. I think we talked about this 3 years ago. You didn't dig deep enough... Edited April 16, 2015 by 98Z5V
planeflyer21 Posted April 16, 2015 Report Posted April 16, 2015 Someone needs to get busy with a dedicated M3 replica.
Magwa Posted April 16, 2015 Report Posted April 16, 2015 I have always wanted a 45 ar you bastards !!!!!
MikedaddyH Posted April 16, 2015 Report Posted April 16, 2015 I have always wanted a fully loaded tommy gun ! And when I grow up I just may get one.
planeflyer21 Posted April 16, 2015 Report Posted April 16, 2015 I have always wanted a fully loaded tommy gun ! And when I grow up I just may get one. In 10mm!!
Toolndie7 Posted April 16, 2015 Report Posted April 16, 2015 Finally got my wifes 10mm ar build up and running, its a blast to shoot.
MikedaddyH Posted April 16, 2015 Report Posted April 16, 2015 In 10mm!!NO ! I want an original like my grandfather had ! I have a 10mm AR 90% done, its on the back burner. I am in no hurry.
planeflyer21 Posted April 16, 2015 Report Posted April 16, 2015 NO ! I want an original like my grandfather had ! I have a 10mm AR 90% done, its on the back burner. I am in no hurry. Yeah, you're right. Who would want a 10mm Tommygun anyway? http://www.gunbroker.com/Auction/ViewItem.aspx?Item=477901406
shepp Posted April 17, 2015 Report Posted April 17, 2015 bazooka brothers dedicated 45 acp using modified grease gun mags. mech-tech systems uses glock lowers attached either 9mm,40 cal,10mm,45 etc. Emailed them over a year ago got an email in aug saying the own had health issues and they would respond to emails in order and never heard back from them
Toolndie7 Posted April 17, 2015 Report Posted April 17, 2015 Email Justin at CNC Guns. <thumbsup> Nice stuff, kinda pricey but works nice. Helped a friend who just did 2 80% builds using his lowers with the grease gun mags
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now