EdMP3006 Posted June 8, 2010 Report Posted June 8, 2010 Hiya guys.....its not a complete rifle from them, but I did get their stripped lowers and uppers, one set for me and one set for my dad.Here is my current parts list...w/ the exception of charging handle, gas tube and pins:Stripped Iron Ridge Upper/LowerMagpul PRSStandard Grip....for nowStandard LPK....for nowDPMS 24" Bull barrelDD Lite 12.0 railDPMS BCG (Chrome)And here it is just pieced together, nothing tightened
Matt.Cross Posted June 9, 2010 Report Posted June 9, 2010 I like the DD FFT the more I see of it... May have to put one on my new project!!
EdMP3006 Posted June 9, 2010 Author Report Posted June 9, 2010 I like the DD FFT the more I see of it... May have to put one on my new project!!I really wanted the LaRue rail first....but, they dont make the barrel nut for DPMS threads, even though on the website it did say that it would fit DPMS......but I really do like it and it came with rail covers as well
imschur Posted June 10, 2010 Report Posted June 10, 2010 Are the DD available again finally or have you had it for a while?
EdMP3006 Posted June 10, 2010 Author Report Posted June 10, 2010 I got mine back in March from RainierArms.com and I just checked and they are currently out......I think I paid about $390 for mine
EdMP3006 Posted June 18, 2010 Author Report Posted June 18, 2010 Guys, i still need to get the gas tube and pin for this, is there someplace you suggest getting it from, as I assume its different than the AR15 gas tubes?
imschur Posted June 18, 2010 Report Posted June 18, 2010 Go here and click on the roll pin. DPMS has a great resource with its interactive schematics
survivalshop Posted June 19, 2010 Report Posted June 19, 2010 Guys, i still need to get the gas tube and pin for this, is there someplace you suggest getting it from, as I assume its different than the AR15 gas tubes?Gas tubes & pins are the same as AR 15/16 family. ( rifle ,Mid, Carbine ) You can get them just about any where you get AR parts from .
EdMP3006 Posted June 19, 2010 Author Report Posted June 19, 2010 Thanks fellas....I just ordered the BCM GUNFIGHTER CH and now all I need to do is get the gas tube and i'll be in business
EdMP3006 Posted November 27, 2012 Author Report Posted November 27, 2012 Hey guys, sorry i've been away for so long, but as I promised, here is my finished rig...I'm putting a Vortex Viper PST FFP 4-16x50 MRAD on her, just need to get some rings for her, most likely Seekins Precision....
Matt.Cross Posted November 27, 2012 Report Posted November 27, 2012 I meant to reply to this sooner, but somebody drooled all in my keyboard and I had to clean it up first. <laughs>Very nice rifle brother, well done! <thumbsup>
EdMP3006 Posted November 27, 2012 Author Report Posted November 27, 2012 Thanks fellas, soon as the glass mounted I'll get a refreshed picture up and hopefully a range report soon!
silviacrazed Posted December 1, 2012 Report Posted December 1, 2012 Nice looking weapon. I've drooled over the Iron Ridge stuff for a while. Let us know how it shoots. I read on here some people were having buffer damage problems and they were having issues with the company's customer service, so I held off. If your set runs well, I'm definitely going to be considering them.
Robocop1051 Posted December 1, 2012 Report Posted December 1, 2012 That looks like a lot of long range fun times ahead!
EdMP3006 Posted December 21, 2012 Author Report Posted December 21, 2012 Nice looking weapon. I've drooled over the Iron Ridge stuff for a while. Let us know how it shoots. I read on here some people were having buffer damage problems and they were having issues with the company's customer service, so I held off. If your set runs well, I'm definitely going to be considering them.Well I built mine from scratch, the only things I got from IRA were just the stripped lower and stripped upper, but from when I did some function firing, I didnt see any buffer issues, but as soon as I can do a proper range test I can give a better opinion...
98Z5V Posted December 22, 2012 Report Posted December 22, 2012 You'll need to get a few hundred rounds downrange before the issue shows up - if it even does. They might have fixed it, and it was bad machining on their part that caused it. They denied that, but it was pretty evident once it was all figured out.If you DO have the problem, there's an easy cure for it. <thumbsup>If you notice the edges of your buffer getting chewed up, you need to post up about that pretty quick.
EdMP3006 Posted August 16, 2013 Author Report Posted August 16, 2013 Well damn, i've been away for awhile...again, but here is the finished product....
Robocop1051 Posted August 18, 2013 Report Posted August 18, 2013 Holy smokes that looks long! Is that 22" or "24?
Rsquared Posted August 18, 2013 Report Posted August 18, 2013 Holy smokes that looks long! Too easy. I'm not even gonna say anything.
Robocop1051 Posted August 18, 2013 Report Posted August 18, 2013 Too easy. I'm not even gonna say anything. I had a feeling that was going to be taken advantage of.
EdMP3006 Posted August 19, 2013 Author Report Posted August 19, 2013 Holy smokes that looks long! Is that 22" or "24? Its a 24" bull barrel, it may eventually get shortened up...
EdMP3006 Posted August 19, 2013 Author Report Posted August 19, 2013 I had a feeling that was going to be taken advantage of. ....Thats what she said!!! LOL
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now