Most Accurate .308, 7.62x51 Factory Ammunition in Your AR Rifle

[Belt Fed]

This stuff runs good in all my Ar10's, even in the creedmore. It won't win any shooting tournaments but it is fine for hunting.

 

[Belt Fed]

This was about 150 yards with a Ruger 7.62. I do use those lights on my guns. have to walk about 400 yards to the stand and they come in handy early morning and late afternoon.

 

[Belt Fed]

The Creedmore at same distance. I used a bipod thou. They both would have done a lot better if I had a solid table. that thing is wobbly.

 

[unforgiven]

Good shooting brother.

[Belt Fed]

Thanks, I have to find a new shooting range now, they cut all the tree and it is all a cutover now.

[Belt Fed]

Think this was 75 yards,( I think) but is ZQ1 fmj stuff.

 

[sketch]

had decent results with the wally run of zqi. best cheep chance results we got at 100''' was 3" group's on a bad day.  have plenty of reloading brass from this.

[hunterbob]

On 11/16/2009 at 9:08 PM, imschur said:

Whats the most accurate factory load in your .308, 7.62x51 AR

I found the 110 Vmax with 3031 powder @ 2900 to 3010 fps the most accurate of any load i tested.. Shootin through the same hole basically at 100 yds. Savage model 10 308 and DPMS LR 308.. 1-10 twist. Right behind it was the 125 gr SST...2800 to 2900 fps... The only round that i used IMR 3031 for too. The 168 gr factory SST is 2nd place to the 110 gr Vmax. The target below is me zeroing in a scope , and the final one click at a time until i got it...(125 gr SST) 308, on the DPMS 308 @ 100 yds . My scope is set to 4x on this target... This is the coyote and hog killer ,, that i can shoot them through the ears with.

Edited April 24, 2019 by hunterbob
one number was incorrect

[Belt Fed]

More ZQ stuff at same distance with the Adams arms..

 

 

 

 

[Belt Fed]

ZQ is murder on chainsaws at 50 yards.

 

 

[Keith E.]

On 11/16/2009 at 10:08 PM, imschur said:

Whats the most accurate factory load in your .308, 7.62x51 AR

FGMM 175 BTHP in an older 16" AR-10T.

 

Keith 

[Sisco]

25 minutes ago, Keith E. said:

FGMM 175 BTHP in an older 16" AR-10T.

 

Keith 

Yeah, good stuff. Will be shooting some tomorrow as a control for my reloads. Interestingly enough also in a 16" AR10T.

Edited August 30, 2022 by Sisco

[shooterrex]

This shoots well in all my 308's

https://www.theamericanmarksman.com/bullets-1st-762-175-gr-m118-lr--400-ct.html

My bolt gun shoots Nosler 165gr balastic tips over 39.5gr of Varget real well.