Toolndie7

I just did a side charge 308 upper on the right side for a guy for $125 I wanted to just do both sides and make it ambi but he didnt want to. I still think the non reciprocating JP side charge is the way to go but so pricey.

36 edit: edge already said it, how about 39

oldie but a goodie more of the bike if anyone likes it

welcome from RI

Welcome aboard Ron

That's a pretty nice hat !

I sure do. Send me a pm kenichols and let me know what kind of format you need.

I just laughed out loud picturing a canteen slapping him in the face <laughs> on a side note: Thanks for sharing that website Blue, That place looks like trouble.

https://m.youtube.com/watch?v=4WcOcgc3WN4 Sums up this thread lol

sounds like it can be used in either or. As long as the correct tube is used from JP's website Compatibility The JPSCS-AR10 is designed to work in standard 7-inch M16/M4-length buffer extension tubes on .308 AR-type rifles like the DPMS LR-308. Armalite .308 rifles, likewise, use these standard M16 extension tubes with rifle-length stocks, so the JPSCS-AR10 will function normally when installed with the supplied spacer. However, Armalite’s .308 carbines use a slightly longer, nonstandard carbine extension tube. The JPSCS-AR10 can still be used with these extension tubes by installing the spacer, which must be modified to fit. Alternately, the system will function readily if the longer Armalite carbine tube is replaced with a standard 7-inch .223 carbine extension tube. The JPSCS-AR10 is not compatible with the Rock River Arms LAR-8 because of its longer bolt stroke and subsequently longer extension tube.

<munch>

Damn wash, are you sure you didnt start another build and piss off the woman?

Well, thats a first

Nice stuff, kinda pricey but works nice. Helped a friend who just did 2 80% builds using his lowers with the grease gun mags

Finally got my wifes 10mm ar build up and running, its a blast to shoot.

Primers are no concern, but that case is down right nasty. Nova, have you tried a different brand of ammo for shits and giggles? Does the bolt face look ok? Can you depress the ejector pins into the bolt face?

such a bunch of BS. Ive always found it exactly the opposite.

you keep using that word, I dont think it means what you think it means lol

" from the makers of the original pocket farkel "

Ironmonster, any chance you can get that tube in one more turn? That's a 16 threads per inch thread size if I remember right, if that's the case you would be crashing by 1/16" maybe you could measure your dent in the receiver and see if it's about that depth? I'm just trying to think simple.

thats a funny skit lol https://www.youtube.com/watch?v=xFN9Km9KFXU

98 with a bore scope and a bottle of break free