shooterrex

How much does your buffer weigh? It should be in the 5 1/2 oz range. Does the bolt lock back on an empty magazine if you only shoot 1 round? Do not confuse rifle length gas tube with the with what recoil system you need. It is all about reciprocating mass. BCG and recoil springs w/buffer have to work together with the gas pushing the BCG rearward. Did you start test firing with the adjustable gas block wide open? If it doesn't lock back on an empty magazine wide open your gas port is not large enough. Drop by the introduction section and tell us a bit about yourself.

Welcome from KY

Welcome from KY.

Nice

^^^^^^ Good $hit

I picked up one of these a while back. Runs low brass and high brass both. Rural king had them for $379. The first one listed. https://www.charlesdaly.com/family.php?id=86

Nice paint job.

^^^^^Nice

Primary Arms has these on sale again 1/2 off normal price. Mine shoots well.

Yep Palmettos stuff only fits Palmettos stuff without a LOT of work.

Looks good. Glad you got it running.

I haven't had any problems w/my ASC Grendel mags in the 6ARC. I have only shot about 100 rounds so far. I bought some ASC's in FDE for the ARC so I can tell them apart from the loaded Grendel mags.

Welcome from KY.

The orange will probably work w/slash's buffer. I'd try that first. The Armalite spring is designed for a slightly longer buffer tube.

What I read on the link you posted for the upper is that it is their gen2 NOT DPMS G2. And I would also bet money the upper doesn't fit PSA's lowers. Like 98Z said just change the barrel to a standard DPMS pattern and you have lots of options. You are going to spend a ton of money and time chasing down compatable parts. These large frame guns are not built to any type of milspec standard.

Looks like the ground anchor for guy wires for a telephone pole.

Welcome from KY

We need a LOT more info to be able to help you. Search the thread "waterboarding" That's the kind of info we need to be able to help.

Welcome from KY.

If there is a cap on the grip look inside the grip. That's usually where the put them.

https://www.wingtactical.com/firearm-parts/ar-10-lr-308/ar-10-lr-308-upper-receiver-parts/ar-10-lr-308-bolts-carriers/aero-precision-308-bolt-carrier-group/ This should work fine.

Any of the DPMS style bcg's should work. I have 2 guns built on PA10 receiver sets. 1 has a PSA BCG the other I am using one from Brownells (their brand). Stop by the intro section and introduce yourself when you get a chance.

Get the cataract done. It's like new eyes. My right eye before surgery the big E at the top of the chart was a blur. Now 20/20 in that eye for distance. Still need readers for up close. If you scope is focused properly to your eyes you can take the glasses off.

I've never owned one but I had a customer at the gun shop and that's all he would buy. Swore by them. I also was a fan of Nikon.