Robocop1051

Has anyone here heard of the "Blitzkrieg Components" Chevron Front Sight Post? I'm a little intrigued by this.... Especially for a SBR/Pistol length sight radius. Anyone here have any info or feedback on this?

I'm headed to the store today to buy a new bolt. The way I have this stock setup, I want a thicker bolt holding it in. It's supposed to have three bolts, and I can only get two. I don't think there's enough "meat" to drill the third hole.... Getting closer!

LMT ($170) and Cason Engineering ($180, w/enhanced firing pin) make the #1 bolts right now. MGI makes a decent bolt as well, and is a hair cheaper.

I have a feeling that the OP isn't going to pop for that stock.

Love that stock!

Well shitsticks... that didn't go quite as planned.... Pictures soon to follow. Trying to mask my fuck up.

So do I; A. Heavily modify the milled receiver, removing a significant amount of metal, and keeping the stock as near to original as possible. B. HEAVILY butcher/modify the stock to fit the receiver and try to get by with drilling a few hidden holes in the receiver. I'm feeling B... neither are reversible.

Are you asking about the forward assist? As for building a cheap rifle... I have a custom carbon fiber barrel and a $200 compensator... I can't help you.

I actually like the skeleton stock personally, but this isn't for me.

I took it out already, pre-molestation, and shot the shiit outta it. It ran fine on steel communist ammo. Even the corrosive stuff. My cousin wants it to look more "modern" without turning it into another AK with AR parts.

I recently took the task of modifying a family members AK... it's a Century C39v1 to be exact. The new "American AK" has a milled receiver, and while it looks the part, it has a few compatability issues with the legendary AK47. I first modified it to have a top rail... easy and done. Next was to replace the handguard. This was a little difficult and required some permanent modification to the rifle.... so fuckin what, it ain't my rifle... done! Last is the stock... fuckme fuckme fuckme... OK, this is where the milled receiver is VASTLY different than the stamped receiver. The AK stock will NOT fit as it is.... dilema: 1. Scrap the whole plan and change stocks. or 2. Drill/cut the receiver to accept the stock. (Stock will require some fitting as well) The option for alternative stocks is very expensive. The option to permanently modify the receiver may make me the 1st and only person (so far as I can find online) so make this modification on a C39v1. Thoughts?

FC, welcome. I can't wait to pick your brain on AK stuff.

Seriously... When you guys use CMMG parts, and they fail you.... Is the first thing out of your mouth, "Fukc Rob!"

Oh Tool....

I sense a four letter word...

This is the first time I've heard anyone say this about the KSG.

Took the wife last week. We both enjoyed it.

I'm with you on this one. I may have to "back burner" the idea of a tomahawk for a bit. Having newborn twins and a 2yo eats the budget. Don't know if I can justify a 2hawk right now.

I'm still holding out to see what Dark Timber makes. If his axe is anywhere near the price of his knives, I may get pushed away again... but damn his stuff looks good.

I'm very tempted to get the 2hawks LongHunter 'hawk. The price is on point for me and the design is similar to what I was looking for. The CRKT Chogan is even more affordable and has nearly the same attractive features. It's a bit bigger than the 2hawk version, but not too much bigger.

13.7"!!!11!!ONE!!

Lol. I've seen that exact thing done. It had me scratching my head for nearly a half our as I tore her down.

NiB can get a burnt discoloration. It doesn't effect the NiB. You should be using FireClean to prolong your NiB.

Don't get tricked by the pants down hug! How about some more 7.62x39 options? Maybe a carbine 14.5" or a 13.7"?

The blk pistol has more rounds through it alone than most people put through their entire collections. It's been the cause of death to more than its share of rodent as well.