98Z5V

I'm the AR-Gun-Whisperer, man. It's what I do. With enough (proper) information from someone that's having issues, it's not hard to figure out. You gave that information, and I thank you for that. Don't be afraid to publicly admit... that the Pants-Down Hug was right up your alley... Figuratively - not Literally - of course...

Biden.

This is the cycling issue, right here - all of it. Was that 7" number you put out the overall length of thte receiver extension, or the internal depth of the extension? Doesn't matter, either way. You need to be running a 2.500" long buffer with the 7.000" internal depth carbine receiver extensions. Your buffer is 3/4" longer than that, and won't le tthe BCG cycle fully.

Distributor might have said it was in stock - but probably not the manufacturer. RRA is always slow on shipping items, even when you order parts directly from them, as an individual. 30~45 day wait is common, even if it's just a match barrel, or NM Carry Handle. That's just how they work. Compound that by the current situation - like @unforgiven stated - parts, kits, whole guns, just flying off shelves, left and right, because of demand - because of several reasons. Election year, Bullshiit Pandemic, Lawlessness/Riots, which leaving people feeling unsafe... It's been a ginormous record-year for sale to new gun owners - those taht thought they'd never need a gun... Those types of people walk into gun shops and buy anything that's not already spoken for. Plus, all the ammo that they're allowed to purchase. It's a pretty wild year, and the shiit that's going on this year far surpasses the idiocy after Sandy Hook, which went down 14 Dec 2012. I had a complete parts order for a whole gun, in pieces, that Sunday, and everything shipped on Monday, 17 Dec 2012 - and after that, everything dried up... This year far surpasses that nonsense that we went through.

Hairdresser for Gun Pusher John's wife is up next. Well, she was available a few weeks ago anyway. Contacted the old hairdresser of mine tonight, we'll see what I hear back. She was BADASS!!!

But... you were just at the hair salon... !!! WTF?!!?

So, how's your hair, brother?!!?...

Wasn't that already posted here?... The Canuck has been confusered...

Hey hey hey... Brother, go easy on Rex... we need him to come back here next year... Co-Pilot Dave is mandatory, too...

Oh, 44 minutes agoi!!! I DID miss that, with all your New Year Well Wishes that is was all lumped into. My bad. Thanks for answering that, and answering it again. Sucks that it took two people asking you that, to get to the information. Usually, an Intro Thread will state where you are from. You missed that part, I missed your final answering of that. Chock it up to misinformation and confusion.

We need to talk to your therapist. We need to get you back into the Real World, brother...

Well, alright. PSA FUCKIN' SUCKS. I'd buy ANY CMMG parts before I'd buy any PSA Large Frame Garbage. I hope that was direct enough.

AWESOME! SO, WHAT STATE DO YOU LIVE IN?! How did you miss that?!!?. Answer up, man.

Not even a little bit. Daniel Defense is a very big contractor to the US SOF. Rails. Smith & Wesson can't say that they provide any guns to the military, and PSA DAMN SURE CAN'T SAY that they provide ANYTHING to the military. I've shot the DD .308 guns on the range, and they are everything that they say they are. You won't "Fuk up" by buying one. No real info on M&P 10s, as stated before. Is that good or bad? No idea. Do not buy a PSA .308 gun. You WILL put in work, to get it to run right. All the people that think they're getting a "cheap .308AR with a LifeTime Guarantee" soon find out that it takes some work, and some money, to get those cheapass guns running like they should have run, right out of that factory. There's a reason behind the cost of those guns, and that's because they don't spend the money on what it takes to make it run right, from the get-go. They undersize gas ports to restrict gas flow, so they can use a weaker recoil system with a weak spring, and use a buffer that's lighter than what's necessary - because making a heavier buffer would involve Tungsten weights, which cost $$ more. Cheap gun, for most people, with whatever ammo, and might work most of the time. Sometimes. We fix alot of them here... Stay away from the PSA. Buy the DD, on your original impulse. Great gun. There's my $0.02 on the whole affair. EDIT - at any time, anyone from PSA can come in here and tell me where I'm wrong. I'll welcome that feedback, directly from the company...

Okay, but you missed this question... What state do you live in? Recomendations depends on that, right there, with all the different restrictive-state gun laws. That's an important question to just not "gloss over" and ignore...

Right now, the .358 Win is a complete upper, nothing more. No brass (no worries, I'll make my own), no projos... No Lower... If I get the ammo in order, I'll just pin it to something else Large Frame, and get busy. Got a AP M5 lower sitting at the gun shop, but just can't get there during holiday hours. Fucker is slacking, and cutting hours short during the holidays...

I think it might be too late...

Damn, she's kinda cute, too! I just told mine to Fuk Off tonight, so I'm ready for a new one!...

That's an ass-backwards way of solving the issue. There's no possible way that what you did solved your issue, if your issue was the same as the OPs issue. Please explain, and give details. Pics will be appreciated.

That's exactly why this site exists, in the first place...

Well, I just tried to give them money, but your billing address MUST match your shipping address. Did that. My billing address is a PO Box, and they will not ship to a PO Box. I'll call them, and try to sort this out, but if they won't budge, they can fuk themselves. No phone number listed in their information/website, but I'll find one for them.

Hate to say this, but it's not the job of the police - it's not their jurisdiction. The only agency with the jurisdiction to ask you for any legal documents pertaining to any firearm that might conflict with the gun laws in the US is the BATFE. No other officer has the jurisdiction to see your paperwork - ever. State rules are state rules, and if you have to have a license for a gun - then state, local, whatever - can ask for that State information. NFA? Nope. Not unless it's against some state law. NFA Stamped items? Only BAFTE can ask you for a Stamp for proof. Everyone else - better call your local BATFE Guy, and ask him to show for "proof of Stamp..." Some police might be able to "detain" you, in WAIT for an agent from the BATFE - but nobody else has the right to see that paperwork, but a real agent from BATFE. Just thought I'd throw that in there. If local police are asking you for paperwork on an item - it's NOT their jurisdiction. Not their game to play. Same goes with County Sherriff's, State Police, etc. The rule to "inspect paperwork" falls at the level of the "Rule to Inspect Paperwork." BATFE is the only ones that can ask you for a Stamp. That's what their whole game is. Others can detain you, until BATFE gets there - but any level lower than that is not in the position to determine what you really have...

They've reinvented the 3rd pin. Those with a 3-pin lower know what I'm talking about.

This is gonna get interesting. BATFE heads are gonna explode. https://www.rarebreedtriggers.com/product/frt-15/