98Z5V

@DayWalker, that's a good vid from KotaBoy32, but he stated something that caught my attention, on the 6.5 Grendel side of the house. He stated "that from a 16" or 18" Grendel, I was getting 2300fps, give or take some change." He never stated if it was the 16", or the 18", later, and I don't know what ammo he was shooting when he got that 2300fps. However,... ...my chrono'd pet Grendel load gives me: 12.5" shorty pistol gun - 2369fps 16" Mk12 Mod H gun - 2495fps 18" SPR gun - 2534fps Same load, shot through all three guns. Shiit, same load shot through all 5 guns. I need to chrono that load through the other (lighter) 18", and the 16" Grendel M4. ^^^ That right there is why I'm itchin' so bad to drive this thing hard, and really, really test it out. I've got the guns to test it against. I need to unfuk my SPR .224 Valk handload, and really get that thing dialed, with the 88gr ELD-M projectiles, before we truly pit these bitches against each other. There's some shiit comin' down, men. We're gonna find it all out, I guarantee.

I'm telling you, Mack, and I've told you before - I think you might be my daddy...

OOOOOHHHH!!!! I like the "F" one!!! I could watch that idiot get kicked, all day long. Larry was right - KARMA!

It's the world we live in, brother. We're stuck with those idiots, on this rock.

I just got it today in the mail. The Perun. I'll check it out tonight when it's dark, and report back. 7 lights came in today, so I'll test a couple tonight, and get the rest this weekend.

Sweet update, Bill!!!

I just hate all this "he/she/it is an Internet Influencer" or "Internet Sensation..." Who are they influencing? And why are they sensational? Influential because their fans live in Mommy's Basement, and the never come out to see the light of day? Sensational, because that's all they can do, and they can't do anything else?...

Gonna be exciting, I'm positive. I'm way more fired up over this one that that damn Valk. Can't wait to sling lead with it. My 1~3 month wait is killin' me. If it's really 3, then it would get to me mid-September - not alot of time to lock a load down. News from Hornady today - No idea on packaged brass, for a timeline, because the committment is to the military ammo that they're making, then to the commercial loaded ammo that they're making. After that, it's packaged brass. The "Custom Grade" reloading dies will be available by the end of the month. I've got a couple sets of those dies, and they're damn nice. At least I'll be able to reload the brass that I have, after shooting it up.

She's just a dip-shidiot. Total dumbass. Without internet, she has zero skills, unless she's trolling guys in the local bar. Look more into her, and it'll be apparent. Attention Whore. Nothing more. Know-nothing internet "sensation..." means = zero skills in life, unless a camera is in front of you, and you're on your game. She is the epitome of "not worth a shiit in life, and I'll never make something of myself."

Just make them take your meat, brother. There's some satisfaction in that, all by itself...

Sorry, brother - Belle Delphine is a fucking idiot. You couldn't find a more stupid chick on this planet, even if you were funded by the CIA, researched by NASA, and had the full support of the US Military - all of them. You fail in that task, to find a chick more stupid than Belle Delphine. She's an internet asswipe. ***Strictly my own thoughts presented. I hope she tracks me down, personally, to ask me what I really think.

She's an idiot - reminds me of a former step-daughter that was a complete dumbass, about 3-almost-wives ago... What a headache... I wouldn't bang that with Ron's dick, and Matt pushing...

That was a new caliber for them, too, for what it's worth. A few years ago at SHOT, I asked them about the possibility of them making a .260 Rem gun, and they said they had their hands full with 6.5 Creedmoor, so it didn't look promising. Then... Boom. LaRue .260 OBR.

It's actually an AR-18. And she was an IRA chick, in the 1970's. I found the info. https://rarehistoricalphotos.com/female-ira-fighter-1970s/

I would be the Maple Lumberjack. Of all us March boys, I must say - mine is WAY COOLER than theirs is!!!...

Happy Fuckin' Birthday, Brother!!! I know you didn't need the word to get out, but @Lonewolf McQuade already busted your ass out over on @Full30.com. Best wishes, man.

That post was made on June 14th - long before you joined this board. Confused, maybe? I wasn't talking about you, if that's what you're flared up about. Go relax, and actually read the dates on posts here, before you get bent out of shape. It'll benefit you in the long run.

You're not the only one. I have lower, barrel, ammo, projos... and I'm a parts-shipment away from a full gun, with that UU order. Optic is on the way already - Athlon Ares BTR Gen 2 HD. It's the 2.5-15 Mil scope. It's basically the same scope that I put on the 16" Grendel Mod H, but that one was the first gen. I pulled this thing for $519. Unreal. I'm so fuckin JACKED UP over this gun, it's not even funny. I really think it's all that hype - that it's supposed to be. Grendel smokes Valkyrie. This bastard better smoke Grendel, all I can say. Scope Porn: https://athlonoptics.com/product/rifle-scopes-ares-btr/ I found some interesting shiit on the 108 ELD-X match load, velocity-per-inch-of-barrel. I should be jamming 2600fps through the 18" barrel. I'll plug that shiit into a calculator and see what's up. Hornady load data is always "conservative," and I find my best performing loads just a tick over what their book-max is - everytime - so I'll see if I can push this fucker a little faster. I'll be calling them tomorrow and waterboarding them over the load data (still not published), and reloading die information. Check this:

@James G, please read this thread here, and give up WAY MORE details on what's going on. Read the thread first, so you realize the amount of details needed - to diagnose something over the internet. Also, start your own thread on this, so it's easier to keep track of in the future. This is way more than a double-feed issue going on here. Hope that all makes sense. Thanks in Advance. Oh, I almost forgot this part - go rip up the Intro Section when you have time, and tell us about yourself. Here's a link to it: https://forum.308ar.com/forum/22-introductions/

The phonecall tomorrow will be to Hornady, brothers.

@DayWalker, I talked to LaRue today, and asked about your rail - lead time is 1~3 weeks, and they're not behind on those. When I asked about the lower,a week after ordering it, they told be lead time was 2~3 weeks - that lower shipped in 11 days. Hopefully, that's their pattern, and you'll get some tracking on your rail soon. BECAUSE... I asked about my lead time on the UU Kit... and they told me that the lead time on those was 1~3 MONTHS... Hey, I get it. I just hope it's not at the 3-month end of that lead time... At any rate, Baby Steps... I checked on the ammo today, and it actually had a tracking number. I checked the tracking number, and it said it was delivered - to my work, where I am all day - at 9:43am. I went looking at the boxes that were dropped off - Hmmm... nothing for me. I ask my parts guy if he has a box with my name on it. He looks, nothing. Oh, and my UPS guy is a complete dipshiit, too. Thought I'd add that in there. I walk to the business next door... "Hey, you guys receive a box that wasn't for you?" Their answer - "Well, what was it?" My response: "Oh, it's a box of precision match ammunition - did Mike deliver it you you?..." YEAH, WE WERE WONDERING WHAT THE HELL THAT WAS!!! Helps if you look at the name on the box, before your parts-monkeys cut the fucking boxes open, right? That's apparently above them - to check that the packages they received are actually THEIR packages... Which again, takes me back to my dumbass UPS driver. Fucker delivered it to the wrong place. AGAIN. Some people. I swear. So, anyway, a little bit more headway, in this quest of the "touted perfect cartridge." I'm telling you, once all this shakes out, we're gonna find out how perfect it is, men. At least I have 300 projectiles already - and now I have ammo to zero the scope, break in the gun- and 200 pieces of brass to reload. The Lee Factory Crimp Die for this caliber will be released on 14 August. I'm in the backorder line for one. No dies from Hornady yet, but I'll take Hornady, RCBS, or Lee - whoever comes up first. No brass from Hornady yet, and I'll stick with their brass, or Starline Brass. I can check this off my worry-list. Everything from here on out is just gravy.

^^^ That right there is that Complicated Shiit... that you're not supposed to Complicate Shiit with, brother. We'll work it all out. Range Session is a must, but we'll solve it.

Somewhere in the back of my mind, my Spidey Senses are tingling... and I predict a 6 ARC Mk12 Mod 0 for a certain @Matt.Cross. I don't know what it is - I just feel it. Weird how that works.

Water splash, soaked boobs, and I get to watch it... - I'll take what I can get, in slo-mo, brother.