Jump to content
308AR.com Community
  • Visit Aero Precision
  • Visit Brownells
  • Visit EuroOptic
  • Visit Site
  • Visit Beachin Tactical
  • Visit Rainier Arms
  • Visit Ballistic Advantage
  • Visit Palmetto State Armory
  • Visit Cabelas
  • Visit Sportsmans Guide

Recommended Posts

Posted (edited)

I don't have any .45, but they held 11 .40 rounds, so that sounds right. There were some crazy looking Mini14 mags in the box. They don't use a spring. There is a metal strip that rolls up under the follower like a measuring tape.

Edited by blue109
Posted

I don't have any .45, but they held 11 .40 rounds, so that sounds right. There were some crazy looking Mini14 mags in the box. They don't use a spring. There is a metal strip that rolls up under the follower like a measuring tape.

 

That's the spring.  It's a type of constant force spring.  They can work well...depends on the build quality.

Posted (edited)

Look like aftermarket.45 ACP for Colt 1911. I have several of them. Some work fine but often the magazine bottom cap will come unsoldered or spot weld that is ground smooth will pop loose and dump the cartridges spring and follower. Happened to me the first time I shot the Texas CHL Proficiency test.

Edited by mrmackc
Posted

That's the spring.  It's a type of constant force spring.  They can work well...depends on the build quality.

Seems like I saw something like that at the Bass Pro/ NRA museum but don't recall the firearm..........might be rare????

Posted

Seems like I saw something like that at the Bass Pro/ NRA museum but don't recall the firearm..........might be rare? ???

 

The Ruger BX-25 10/22 mags have the same style spring.  Not sure about the Butler Creek mags.

 

It is an underused spring design IMO.

Posted

The Ruger BX-25 10/22 mags have the same style spring.  Not sure about the Butler Creek mags.

 

It is an underused spring design IMO.

Seems like it was a military or larger caliber, older than the 10-22 for sure. If I saw it again I'd know it, sometime a year or so down the road it will pop into my burned up brain...........

Posted (edited)

Blue, that could also be a single-stack 10mm mag.  I've had both single-stack .45ACP and 10mm mags side by side, and sometimes it's hard to tell the difference. 

 

I'm betting more on 10-rd .45 than anything else.  It's not a Chip McCormick or a Wilson Combat mag, nor a Kimber or Colt mag.

 

EDIT - found that bitch.  It's an older ProMag extended 1911 mag.

 

77680.jpg

120460.jpg

Edited by 98Z5V
Posted

I don't have any .45, but they held 11 .40 rounds, so that sounds right. There were some crazy looking Mini14 mags in the box. They don't use a spring. There is a metal strip that rolls up under the follower like a measuring tape.

 

 What are you , un-American ! <laughs>

Posted

I just never got hoodwinked by the "stopping power" myth that big ammo perpetuated in order to make bigger profits :D

Turn in your man card at the front desk, one of our associates will be along shortly to aid you in developing a spine.

Posted

I just never got hoodwinked by the "stopping power" myth that big ammo perpetuated in order to make bigger profits :D

:huh: A little history;

 

https://en.wikipedia.org/wiki/.45_ACP

 

Yes, size is not the only factor in stopping power but when checking prices I've noticed that most of the smaller, faster, and magnum type rounds cost as much or more per round. I'm thinking FN makes a good chunk more per round on the 5.7 x 28 than Federal makes on a basic 45 ACP 230 grain ball round.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...