Gas block

[BIGBREW]

Recommendations.  I'm going to need a low profile .936 barrel will be a 20" rifle length.  DPMS upper and lower, rifle length tube, spring and buffer.  Bcg from DWilson.

[EngrBob]

I have used a couple of JP Rifle adjustable gas blocks.  They are clamp on types and retail around $90 and are low profile.  They have worked well for me.

[Flabbergasted]

1 hour ago, BIGBREW said:

Recommendations.  I'm going to need a low profile .936 barrel will be a 20" rifle length.  DPMS upper and lower, rifle length tube, spring and buffer.  Bcg from DWilson.

Not sure if you just need a recommendation for the gas block but here's a good deal on a barrel with the specs you are looking for that comes with a gas block. Plus they give military discounts, if that applies to you.

http://www.marksmanthirtysix.com/product-page/ea0f1005-4d1e-c287-8324-b447bdd7726f

[BIGBREW]

Thanks I'll have to call to inquire to confirm. Says bull but shows a threaded barrel in the pic. I need a bull.  Nice thing is I can always polish that bead blast off.  

Edited January 13, 2017 by BIGBREW

[98Z5V]

Fulton Armory.

[BIGBREW]

Sent Marksman an email today. Waiting for response. Fulton doesn't have a 20 in a bull. 

[survivalshop]

This thread is about gas blocks . 

http://www.fulton-armory.com/gasblockfvarmintormatchriflecompressionfit936.aspx

http://www.fulton-armory.com/gas-block-low-profile-750-1-1.aspx

http://www.fulton-armory.com/gas-block-low-profile-750-2-1-1.aspx

 

[jtallen83]

 He asked about a barrel as well...........X-Caliber will build one just how you want it, except the gas port size!

http://x-caliber.net.revlis.arvixevps.com/ar-10

I ordered a rifle length gas 16 inch barrel from them and had to drill out the gas port to make it work.

[survivalshop]

2 minutes ago, jtallen83 said:

 He asked about a barrel as well....

He has a thread on Barrels already . I have the Compression Gas Block On my 20" HB .

Edited January 14, 2017 by survivalshop

[DNP]

Hey, we like to keep things on track around here.... The title was gas block. 

 

Anyone hear the Chargers are leaving San Diego?

[jtallen83]

Found it;

Edited January 14, 2017 by jtallen83
smartassedness attack

[jtallen83]

Ok....gas blocks, adjustable;

http://slrrifleworks.com/index.php?route=product/category&path=57_103_168_105

Not adjustable "micro";

http://slrrifleworks.com/index.php?route=product/product&path=57_103_65&product_id=601

from forum sponsors;

http://ballisticadvantage.com/936-lo-pro-gas-block.html

http://www.brownells.com/rifle-parts/gas-system-parts/gas-blocks/ar-15-gas-block-low-profile-prod27015.aspx

 

Edited January 14, 2017 by jtallen83
additional info

[DNP]

[MikedaddyH]

[MikedaddyH]

[planeflyer21]

That phucking thong is going to tweet like a giant sax reed when the gas gets unblocked.

[BIGBREW]

You guys are almost as bad as the guys on my boating page. 

[Armed Eye Doc]

26 minutes ago, BIGBREW said:

You guys are almost as bad as the guys on my boating page. 

They're taking it easy on you since you're new around here.

[BIGBREW]

[planeflyer21]

4 hours ago, BIGBREW said:

You guys are almost as bad as the guys on my boating page. 

"Motorboating" or actual vehicles that float on water?

Because either one would go well with a nice long .308AR.

[beantown]

4 hours ago, BIGBREW said:

You guys are almost as bad as the guys on my boating page. 

Would you be referring to the Hull Truth?

[jtallen83]

2 hours ago, planeflyer21 said:

"Motorboating" or actual vehicles that float on water?

Because either one would go well with a nice long .308AR.

Motorboating for breast cancer awareness, why didn't I think of this!

 

Edited January 14, 2017 by jtallen83

[jtallen83]

[MikedaddyH]

1 hour ago, jtallen83 said:

Motorboating for breast cancer awareness, why didn't I think of this!

 

Duel engines are needed .

 

[BIGBREW]

No the real expensive type that float. The Freaks page.