Albroswift Posted January 12, 2019 Report Posted January 12, 2019 Sunny Morning here on the left coast, headed out to the range with several of my favorite shooters. Then to the shop for a less favorite sport, cleaning. (Damn those wheel guns have a lot of holes!) Bucket O Glocks Bottom left Model 24/ 40S&W, Bottom right M24 w/ wolf 9mm barrel, extension, porting, beaver tail, and slide lightning by yours truly, Top Left Model 34, Top right 17L Freedom Arms 454 Casull and a Hamilton Bowen custom 44 Mag built on a 50th anniversary Ruger Flat Top frame, Herrett grips, Turnbull case hardening. 260g Freedom Arms FP bullet out the pointy end at just under 1850 FPS. Enough room in the cylinder for 2100 FPS worth of case and powder but this is plenty brutal enough on the cowboy gun sized frame! Smith and Wesson 629 Classic 44 Mag built by an old boy for me over in PA and a Rossi Cyclops 357 Mag, hand made grip, new unfluted cylinder, timing and tuning by yours truly.
Albroswift Posted January 12, 2019 Author Report Posted January 12, 2019 Oh, Knew I was forgetting something, the E-Series S&W 45
Ravenworks Posted January 12, 2019 Report Posted January 12, 2019 I picked up a Ruger Alaskan in 454 Casull. I like the 1911 the best
Albroswift Posted January 13, 2019 Author Report Posted January 13, 2019 It is one of the nicest shooting "out of the box" 45's on the market. I fitted the ambi safety, other then that nothing. Has cycled everything I've thrown at it. Stupid tight offhand groups at 50 yards. The milling inside the top of the slide is really rough looking, I mean really rough. Other then that no criticism.
unforgiven Posted January 13, 2019 Report Posted January 13, 2019 Bueatiful set of pistols brother. ?
Albroswift Posted January 13, 2019 Author Report Posted January 13, 2019 Thanks. Got a bunch more in the safe, not too many to shoot in a day but way to many to clean in a day!
sketch Posted January 13, 2019 Report Posted January 13, 2019 one should have to many and for damn sure use them all! i hate cleaning.. nice collection!
Sisco Posted January 13, 2019 Report Posted January 13, 2019 Always find one I don’t yet have that I gotta have!
Albroswift Posted January 13, 2019 Author Report Posted January 13, 2019 Keeping my eye out for an old Ruger Blackhawk 3 screw in .357, and an HK Mark 23. Ahh, the duality of man...
Robocop1051 Posted January 13, 2019 Report Posted January 13, 2019 53 minutes ago, Albroswift said: Keeping my eye out for an old Ruger Blackhawk 3 screw in .357... This is my regular hunting sidearm. I also have a slightly older Super BH in .44mag (2 or 3 digit SN)
Albroswift Posted January 13, 2019 Author Report Posted January 13, 2019 (edited) Sweet! Love old Rugers Besides the Hamilton I have an early 44 Flat Top BH, un converted, a 44 SBH and a 45 Colt/ ACP BH convertible 3 screw, both lawyered up but have the original parts also. (Also a couple single sixes, 22/ 22mag) Do you know if they made a .357/ 9mm convertible in a 3 screw? I had a new model 357/9mm convertible but didn't like it, traded it off. My hunting sidearm, Ruger 45 Colt 4-5/8" W/ full blow H110 loads 300 gr XTP clocking a little over supersonic. (and the biggest ball of flame you ever did see!) Edited January 13, 2019 by Albroswift
Albroswift Posted March 24, 2019 Author Report Posted March 24, 2019 Added another pistol: AR-40 S&W build "Fun at the rockpit" Budget Build Everything bought on sale/ on the cheap except BCG and buffer, went with a retail Stern Defence BCG and a 7.5 oz KVP pistol buffer. Aero Upper Anderson Lower TorkMag Magwell blocks for glock mags KVP 4" barrel and linear comp Ebay pistol brace and handguard Sightmark Ultra Shot R-Spec Reflex Sightmark Low Pro Mini green laser Stern Defence BCG- (single most expensive part of the whole build!) KVP 7.5 OZ buffer Shoots better then I could have expected. Flings brass like a madman, 30 feet + at 4:00 Very pleased with the Sightmark R-Spec and KVP barrel, drills the center ring at 50 yards repeatedly, way more accuracy then I was expecting for a $79.00 4 inch barrel and $129.00 red dot sight. TorkMag mag well block system fed well except sometimes fumbled the last round, a little adjusting and it has been flawless ever since. No LRBHO, I suppose can live with that if everything else is screaming. 23-1/2 inches of fun.
sketch Posted April 5, 2019 Report Posted April 5, 2019 ill add a pistol pick in .9mm its almost done!
sketch Posted April 5, 2019 Report Posted April 5, 2019 mocked up with the x39 10.5" and a 50 rnd drum..
sketch Posted April 5, 2019 Report Posted April 5, 2019 (edited) 24 minutes ago, Belt Fed said: Nice, what sights you goin with? sig romeo 5 Edited April 5, 2019 by sketch
sketch Posted April 6, 2019 Report Posted April 6, 2019 (edited) fm products or foxtrot mikes out of idaho. purchased a 7" hg from the lgs.. um its 7-5/8" not 7" so it will run but I will find a better fit down the road. loaded 4 33rnd mags and a 50 rnd drum thanks to an uplula mag loader!! sunday fun day! Edited April 6, 2019 by sketch
sketch Posted April 6, 2019 Report Posted April 6, 2019 14 hours ago, Albroswift said: Pretty cool, what's the receiver? what flash can did you use and thread pitch? I found a kak in 1/2x28 but its a tad short now..
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now