imschur Posted November 16, 2013 Report Share Posted November 16, 2013 9", 12.5" and 16" http://bit.ly/1gTOD6F Quote Link to comment Share on other sites More sharing options...
Rsquared Posted November 16, 2013 Report Share Posted November 16, 2013 I do like that Knight's rail. Couldn't find it at the time when I built mine though. Quote Link to comment Share on other sites More sharing options...
Jgun Posted November 18, 2013 Report Share Posted November 18, 2013 I picked up one of the URX rails, the thing I haven't seen anywhere are the 9" barrels. Quote Link to comment Share on other sites More sharing options...
Dane Armory Posted November 18, 2013 Report Share Posted November 18, 2013 I am making 300 blk pistols barrels this week, I have 3 that are not spoken for. Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted November 18, 2013 Report Share Posted November 18, 2013 (edited) On 11/18/2013 at 3:40 PM, Dane Armory said: I am making 300 blk pistols barrels this week, I have 3 that are not spoken for. When the time comes... I'm going to contact you about a 7.62x39 pistol barrel and bolt. I'm trying to score a PWS long piston system first. Edited November 18, 2013 by Robocop1051 Quote Link to comment Share on other sites More sharing options...
Dane Armory Posted November 18, 2013 Report Share Posted November 18, 2013 On 11/18/2013 at 3:43 PM, Robocop1051 said: When the time comes... I'm going to contact you about a 7.62x39 pistolAR on AK platform ? Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted November 18, 2013 Report Share Posted November 18, 2013 On 11/18/2013 at 3:47 PM, Dane Armory said: AR on AK platform ? For an AR pistol Quote Link to comment Share on other sites More sharing options...
Dane Armory Posted November 18, 2013 Report Share Posted November 18, 2013 We will have to order some blanks... 3 month wait on barrels. Quote Link to comment Share on other sites More sharing options...
unforgiven Posted November 18, 2013 Report Share Posted November 18, 2013 What type/caliber barrels do you fab up brother ???? Quote Link to comment Share on other sites More sharing options...
Dane Armory Posted November 19, 2013 Report Share Posted November 19, 2013 Pretty much everything, if we don't have the reamer we would have to order that. Lance has most of the standard calibers ready to go. Barrels blanks are sometimes the time delaying factor. Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted November 19, 2013 Report Share Posted November 19, 2013 And if I provide a bolt, will you guys mate it to the barrel? Quote Link to comment Share on other sites More sharing options...
Dane Armory Posted November 19, 2013 Report Share Posted November 19, 2013 On 11/19/2013 at 12:08 PM, Robocop1051 said: And if I provide a bolt, will you guys mate it to the barrel?YES ! Quote Link to comment Share on other sites More sharing options...
edgecrusher Posted November 19, 2013 Report Share Posted November 19, 2013 Hey Mike, custom profile? Thinking of a .308 sbr, dissy, would it be possible to get mid length gas? Just spouting off, I really have no idea if it's possible. I was thinking a 12.5" barrel to go under a rifle length Ma-ten keymod Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted November 19, 2013 Report Share Posted November 19, 2013 I was going to tell you on the phone yesterday, before I was so rudely interrupted by dirt bags... There's a 12" mid length 5.56 already being marketed (I'll look it up). No reason why a .308 can't do the same. Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted November 19, 2013 Report Share Posted November 19, 2013 Found it... http://lvoa.us/?page_id=80 Quote Link to comment Share on other sites More sharing options...
SwissyJim Posted November 19, 2013 Report Share Posted November 19, 2013 On 11/18/2013 at 3:40 PM, Dane Armory said: I am making 300 blk pistols barrels this week, I have 3 that are not spoken for. length? twist? details... Quote Link to comment Share on other sites More sharing options...
Dane Armory Posted November 19, 2013 Report Share Posted November 19, 2013 On 11/19/2013 at 5:41 PM, edgecrusher said: Hey Mike, custom profile? Thinking of a .308 sbr, dissy, would it be possible to get mid length gas? Just spouting off, I really have no idea if it's possible. I was thinking a 12.5" barrel to go under a rifle length Ma-ten keymodThat is what we do ! Lance says No problem. Quote Link to comment Share on other sites More sharing options...
edgecrusher Posted November 19, 2013 Report Share Posted November 19, 2013 Awe shit! We need to talk! I'll pm you with some plans! Quote Link to comment Share on other sites More sharing options...
Dane Armory Posted November 19, 2013 Report Share Posted November 19, 2013 On 11/19/2013 at 10:28 PM, SwissyJim said: length? twist? details...9.5 to 10 inch , 1-8 " twist , SS , pistol gas length , will thread the muzzle. That's all I have for now . Quote Link to comment Share on other sites More sharing options...
SwissyJim Posted November 20, 2013 Report Share Posted November 20, 2013 On 11/19/2013 at 11:22 PM, Dane Armory said: 9.5 to 10 inch , 1-8 " twist , SS , pistol gas length , will thread the muzzle. That's all I have for now . hmmm... was hoping for 8" or 8.5" and 1:7... gonna be 90% suppressed subsonics. Quote Link to comment Share on other sites More sharing options...
Robocop1051 Posted November 20, 2013 Report Share Posted November 20, 2013 SwissyJim, What weight are you thinking of shooting? I have a 300Blk, and the 1:8 is optimized for the 205gr sub sonic round. Hornady makes a stellar projectile for it. It also shoots the piss out of the 110, 115 and 125 grain stuff I've been shooting. I know there are 220gr and 240gr out there that would excel in a tighter barrel, but I'm pretty sure those are just FMJ/Ball ammo. Good for pokin holes... and that's about it. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted November 20, 2013 Report Share Posted November 20, 2013 Jon and I visited Mike, at Lance's shop - they have it really going on. We spent so much time talking that we missed our 2A rally in Phoenix. It was worth the talking, and missing that rally. <thumbsup> Quote Link to comment Share on other sites More sharing options...
SwissyJim Posted November 20, 2013 Report Share Posted November 20, 2013 On 11/20/2013 at 2:56 AM, Robocop1051 said: SwissyJim, What weight are you thinking of shooting? I have a 300Blk, and the 1:8 is optimized for the 205gr sub sonic round. Hornady makes a stellar projectile for it. It also shoots the piss out of the 110, 115 and 125 grain stuff I've been shooting. I know there are 220gr and 240gr out there that would excel in a tighter barrel, but I'm pretty sure those are just FMJ/Ball ammo. Good for pokin holes... and that's about it. Truthfully? Whatever the hell I can get my grubby hands on! I was looking at reloading for the 220 as I have read a lot of good reports on it. But really, the only 1:7 twist I have seen is the Noveske and I've been trying to grab one for MONTHS now. I should have grabbed the Rainier Arms 8.5" 1:8 when they had them, but missed that boat too due to indecision. The 1:8 is fine, as the 205 works for me too, but I am not going over the 8.5" length... pairing this with the Specwar so since it's longer my barrel is going shorter ;) Quote Link to comment Share on other sites More sharing options...
Magwa Posted November 21, 2013 Report Share Posted November 21, 2013 Why are 300 uppers so damn expensive? I don't get it.... Quote Link to comment Share on other sites More sharing options...
Dane Armory Posted November 21, 2013 Report Share Posted November 21, 2013 On 11/20/2013 at 4:04 AM, SwissyJim said: Truthfully? Whatever the hell I can get my grubby hands on! I was looking at reloading for the 220 as I have read a lot of good reports on it. But really, the only 1:7 twist I have seen is the Noveske and I've been trying to grab one for MONTHS now. I should have grabbed the Rainier Arms 8.5" 1:8 when they had them, but missed that boat too due to indecision. The 1:8 is fine, as the 205 works for me too, but I am not going over the 8.5" length... pairing this with the Specwar so since it's longer my barrel is going shorter ;)From the data that I have read th "Sweet Spot" length is 9.5 inches for a 1 ~ 8 " twist barrel. I want to try a 1~10" twist barrel for light weight projectols like 90 to 100 grain bullets, seen no data for this there might be a market for it. The reason the 300 aac blk is so high is a supply/demand thing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.