MikedaddyH Posted January 22, 2017 Author Report Share Posted January 22, 2017 On 1/18/2017 at 8:16 AM, MikedaddyH said: Tom I've got around 60 cases at 1.4" that I might rechop to 1.368". Expand Rechopped those 55 pieces of brass and another 60 pieces from 223 LC cases. Cleaned up the shavings and gave them a soapy bath last night. There in the oven now baking ,then I will form the into 300blk brass. Quote Link to comment Share on other sites More sharing options...
Sisco Posted May 10, 2017 Report Share Posted May 10, 2017 All sized and cleaned. Now to trim and ream out the primer pockets. 220 rounds 308. Quote Link to comment Share on other sites More sharing options...
Sisco Posted May 24, 2017 Report Share Posted May 24, 2017 End product: 205 - 168 gr SMK BTHP, 41.2 gr RL15, Winchester primers, M80 brass of 2 manufacturers. Crimped Quote Link to comment Share on other sites More sharing options...
sketch Posted May 28, 2017 Report Share Posted May 28, 2017 Howed you go from 220 bras to 205 loaded? I need to get back to loading... Quote Link to comment Share on other sites More sharing options...
Sisco Posted May 28, 2017 Report Share Posted May 28, 2017 (edited) Did not like the looks of 10 of the brass so I pitched them. Small cracks, or splits, etc. Most of it was 1975 brass left over from 98's lube test, so I was pretty picky. Had a problem with my Lee hand primer, and wedged 5 primers in sideways before I figured out the issue. (A small piece of metal wedged in the cylinder). Didn't want to mess with getting them out so I threw those 5 as well. Setting these aside for the Fall Shoot if I can make it. Edited May 28, 2017 by Sisco Quote Link to comment Share on other sites More sharing options...
sketch Posted May 28, 2017 Report Share Posted May 28, 2017 Thats a good return on your efforts! Its good to note cracks and case difencies for the new to reloading crowd! Quote Link to comment Share on other sites More sharing options...
Sisco Posted May 28, 2017 Report Share Posted May 28, 2017 On 5/28/2017 at 2:16 AM, sketch said: Thats a good return on your efforts! Its good to note cracks and case difencies for the new to reloading crowd! Expand Find a lot more with 5.56 then 7.62 brass. Quote Link to comment Share on other sites More sharing options...
EngrBob Posted May 29, 2017 Report Share Posted May 29, 2017 I finished another 100 .308 reloads, Lake City brass deprimed and sized, trimmed, swaged, then wet tumbled, hand primed, and then loaded with 175 grain Nosler BTHP projectiles. My Faxon barrell really likes the 165-175 grain projectiles a lot better than the 147 grain standards. Quote Link to comment Share on other sites More sharing options...
Sisco Posted May 29, 2017 Report Share Posted May 29, 2017 (edited) Found a few of these today. Sized 500+ 5.56. Edited May 29, 2017 by Sisco Quote Link to comment Share on other sites More sharing options...
98Z5V Posted May 29, 2017 Report Share Posted May 29, 2017 DAMN! Now THAT is a split neck!!! Quote Link to comment Share on other sites More sharing options...
sketch Posted May 29, 2017 Report Share Posted May 29, 2017 Hard to miss that one! Quote Link to comment Share on other sites More sharing options...
jtallen83 Posted May 29, 2017 Report Share Posted May 29, 2017 On 5/29/2017 at 2:59 AM, Sisco said: Found a few of these today. Sized 500+ 5.56. Expand What's the guess as to cause, age or work hardened? Quote Link to comment Share on other sites More sharing options...
98Z5V Posted May 29, 2017 Report Share Posted May 29, 2017 That looks like age, deteriorated brass, and a smashed shoulder - like old, and impact kinda stuff. Once can do it,on old stuff. Quote Link to comment Share on other sites More sharing options...
Sisco Posted May 29, 2017 Report Share Posted May 29, 2017 This was a twice fired Remington/Peters case, 223, circa 1996. Second loading was 24 grains RL15 with a 62 gr IMI M855 clone bullet. First was factory 55 gr. On 5/29/2017 at 2:59 AM, Sisco said: Found a few of these today. Sized 500+ 5.56. Expand Quote Link to comment Share on other sites More sharing options...
survivalshop Posted May 29, 2017 Report Share Posted May 29, 2017 I find a few like this from my test loads , not many now that I Anneal regularly , but .223 brass is cheap still & easy to find , so Annealing is really not all that necessity. Quote Link to comment Share on other sites More sharing options...
Sisco Posted May 29, 2017 Report Share Posted May 29, 2017 On 5/29/2017 at 3:29 PM, survivalshop said: I find a few like this from my test loads , not many now that I Anneal regularly , but .223 brass is cheap still & easy to find , so Annealing is really not all that necessity. Expand Not reloading this bunch after this. Might investigate annealing in the future. Quote Link to comment Share on other sites More sharing options...
survivalshop Posted May 29, 2017 Report Share Posted May 29, 2017 I just started Annealing last year & it has made a difference in 308 Neck tension , not to mention with the 25-45 Sharps made from LC 5.56 Brass , made for easy Forming . I just Annealed a bunch of .223 Brass last week & have sized them , but haven't loaded them yet because of the 25-45 testing . I never thought it would make much of a difference , but it seems to help the Brass . I made my own Annealing contraption with a Battery operated drill & use Temperature indicating paint on the Brass to tell when the correct temperature. Quote Link to comment Share on other sites More sharing options...
mineralman55 Posted May 30, 2017 Report Share Posted May 30, 2017 Switched over to loading 45acp for now. I'm loading the Xtreme 200 grain plated hollow points. I've loaded lots of 200 grain LRN and LSWC, but not hollow points, and I'm experimenting on the length. A lot of my rounds have been 1.250" LOA. Anyone used these Xtreme 200 grain plated hollow point? What LOA did you use? Quote Link to comment Share on other sites More sharing options...
sketch Posted June 7, 2017 Report Share Posted June 7, 2017 On 5/30/2017 at 11:20 AM, mineralman55 said: Switched over to loading 45acp for now. I'm loading the Xtreme 200 grain plated hollow points. I've loaded lots of 200 grain LRN and LSWC, but not hollow points, and I'm experimenting on the length. A lot of my rounds have been 1.250" LOA. Anyone used these Xtreme 200 grain plated hollow point? What LOA did you use? Expand I tried them a while ago at a rn length but had lots of jams. Cant rember how much shorter they need to be but not much? I should have wrote it down.. Quote Link to comment Share on other sites More sharing options...
mineralman55 Posted June 12, 2017 Report Share Posted June 12, 2017 On 5/30/2017 at 11:20 AM, mineralman55 said: Switched over to loading 45acp for now. I'm loading the Xtreme 200 grain plated hollow points. I've loaded lots of 200 grain LRN and LSWC, but not hollow points, and I'm experimenting on the length. A lot of my rounds have been 1.250" LOA. Anyone used these Xtreme 200 grain plated hollow point? What LOA did you use? Expand Follow up on this. I emailed Xtreme, and they got back to me saying load their 45ACP 200 grain plated HP to 1.225-1.235" LOA. I loaded up some test rounds to 1.237" LOA with 7.1, 7.2 and 7.4 grains of Silhouette. Perfect function, primers perfect, good accuracy, all in my 45 Shield. I like these projectiles. They load easily, are clean, and look great to boot! Time to load up a bunch. Quote Link to comment Share on other sites More sharing options...
EngrBob Posted June 12, 2017 Report Share Posted June 12, 2017 De-primed, trimmed, swaged, cleaned and primed 100 .308 cases getting ready to load Varget for the first time in two years. Had to dig out my testing for 168 g BTHP and 175 g BTHP to see what loads were best. Getting too old to remember that far back. Quote Link to comment Share on other sites More sharing options...
mineralman55 Posted June 12, 2017 Report Share Posted June 12, 2017 On 6/12/2017 at 1:10 PM, EngrBob said: De-primed, trimmed, swaged, cleaned and primed 100 .308 cases getting ready to load Varget for the first time in two years. Had to dig out my testing for 168 g BTHP and 175 g BTHP to see what loads were best. Getting too old to remember that far back. Expand That's why you keep records. You do keep records, don't you? Quote Link to comment Share on other sites More sharing options...
EngrBob Posted June 12, 2017 Report Share Posted June 12, 2017 On 6/12/2017 at 5:16 PM, mineralman55 said: That's why you keep records. You do keep records, don't you? Expand Absolutely! Quote Link to comment Share on other sites More sharing options...
Sisco Posted June 12, 2017 Report Share Posted June 12, 2017 On 6/12/2017 at 1:10 PM, EngrBob said: De-primed, trimmed, swaged, cleaned and primed 100 .308 cases getting ready to load Varget for the first time in two years. Had to dig out my testing for 168 g BTHP and 175 g BTHP to see what loads were best. Getting too old to remember that far back. Expand Bob, let me know what you come up with on the 175's. I have a pound of Varget I have to use up. I am set on my 168's with RL15, but have a bunch of 175 gr SMK BTHP's to load. Quote Link to comment Share on other sites More sharing options...
sketch Posted June 13, 2017 Report Share Posted June 13, 2017 On 6/12/2017 at 12:33 PM, mineralman55 said: Follow up on this. I emailed Xtreme, and they got back to me saying load their 45ACP 200 grain plated HP to 1.225-1.235" LOA. I loaded up some test rounds to 1.237" LOA with 7.1, 7.2 and 7.4 grains of Silhouette. Perfect function, primers perfect, good accuracy, all in my 45 Shield. I like these projectiles. They load easily, are clean, and look great to boot! Time to load up a bunch. Expand I didn't write it down but that sounds like a winner! Quote Link to comment Share on other sites More sharing options...
.jpg.ec3114612c85a81fc2e14c82e05fc5bb.thumb.jpg.dfb6b2c84b74631c1f4143b61d62c2b1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.