shooterrex
-
Posts
3,392 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Gallery
Store
Everything posted by shooterrex
-
Nice bench.
-
I have most of his books. RIP.
-
Aero 308 build short cycling with slo mo video
shooterrex replied to Bjj51's topic in Building a .308AR
That's normal. They seal against the inside of the bolt carrier. -
When I visit that area we shoot at the Fairfax Rod and Gun Club. I have a friend that is a member there.
-
Upprer compatibility with Armalite lower
shooterrex replied to Trapster's topic in General Discussion
There are no specs for the large frame guns. Each manufacturer does what it wants. If you are buying parts you hope they all work together if they are not from the same manufacturer. -
Just watched Heat. Under Seige is on next.
-
Upprer compatibility with Armalite lower
shooterrex replied to Trapster's topic in General Discussion
It doesn't matter which barrel nut holds the barrel on if the receivers fit together and the pins hold them together. Eagle arms is owned by Armalite. -
Looks good. Lube the crap out of the BCG.
-
Merry Christmas everybody. We have dad home for Christmas so it's all good.
-
-
Yep the blanket catches fire and you are warm for a bit.
-
You can make something to boil water in out of tin foil. Takes up almost no room folded up
-
Welcome from KY
-
Always mount the scope mount on the receiver. Don't bridge onto the rail. Push the mount forward before tightening mounting bolts. That way it can't work forward under recoil. Your fore end was probably flexing under recoil and that is what caused the shiny spot.
-
Had babies in the yard one day. They were burned in the trash pile not buried.
-
Nice.
-
Welcome from KY.
-
Always liked him. Now I know why.
-
My PSA 20" had a "midlength' gas tube. The correct Armalite part is a carbine length gas tube to replace the PSA "midlength'" gas tube. Not sure which one you need but unless they changed something you probably ordered one too long.
-
Loctite comes loose under heat. Rockset works better for gas blocks.
-
The more freeloaders the more competition for the resources not less. Hungry people will do whatever it takes to eat.
-
Welcome from KY. Yep PSA doesn't always do a good job but we can get it running for you
-
Barrel Extension Doesn’t Go Far Enough into Upper Receiver
shooterrex replied to MaineMan2's topic in Building a .308AR
If you heat the receiver and freeze the barrel it should slide right in. -
BCG should be dripping wet w/lube. Get some brass cased ammo. Steel is not your friend. Open gas block all the way open then close down a bit at a time till it doesn't lock back on an empty mag then open back up just a bit. Pictures would help.
-
Very nice.
