98Z5V

I screwed you grandson over, too - well, not him, but I sure screwed you over! <lmao> That was so much fun, seeing him shoot - when he wanted nothing to do with it in the beginning. That boy took to it WELL. <thumbsup>

That 1-9" twist will do that. I think my 55gr handloads with Varget will do some amazing stuff through this one. I've never purchased any 52 grain stuff before, but I think I will, just to try in this one. 52 gr Hornady Amax might be on the next shopping list. I was shocked at how the PPU 69gr did in it. Shouldn't have done as well as it did, by math.

Coincidentally, we set a heat record today (24 July) in Phx. Previous record high for today was 114 degrees. We got 116 degrees today. Just trivia, but that's pretty hot. :tweed: Here's how it's set up now, and how it will stay: So you don't have to turn your monitor or pull your neck... <lmao> Closer look at the scope: Zero with 55 grain M193 ammo, and then shot onto targets with various ammo: Upper left here was the M193 55gr stuff. Upper right target - I was really shooting at that upper right bull - was Federal American Eagle M855, 62gr green tip. This rifle DOES NOT LIKE M855 at all. Dead center was surprising - Prvi Partizan 69gr HPBT Match. That heavy (or heavier, for a 1-9" twist) did really well. I wish I had some of my 55gr handloads out there, but didn't take any with me. I'll never shoot M855 through this thing again. I will use more M193, 55gr through it, and test it more. I'll definitely run my 55gr handloads through it, and I'm interested in shooting more 69gr PPU Match in it to see how it does at longer distances. Next up, once it cools a little - testing the 50-yards zero dead-on at 200 yards, on steel targets. <thumbsup>

Well, as things would have it, I didn't like that giant, heavy scope on this rifle. For what it is, it should have something light. I searched for quite awhile, got hands-on a few different scopes to check them out, and finally settled on something permanent for this rifle. I think I came up with the perfect combination for it. Nikon P-223 BDC Carbine. It's a fixed 3-power scope, short, and light. Comes in at 8.1" long and 12.2 ounces. The reticle is their BDC reticle, with the center hash set for 200 yards. Two ticks below are 400 and 600 yards. Mostly, what I was after was the thing is already ticked-out and set up for 55-grain ammo on the hash marks. With the MVP rolling a 1-9" twist, that's about the best twist for 55gr rounds through it, and not the heavies. This scope is everything I need for this rifle. Reticle: Took it out last Thursday - fuckin HOT out! Dawn Marie did NOT miss the chance at a shoot, so she loaded up her Ghost-BLK. Set stuff up for a 50/200 zero on mine. Get the 50 close on it, and check some different ammo. We were only out until about 12:30pm, and decided to get the hell out of there. This was as soon as we got back:

That was pretty fast for a Lilja barrel! - damn that's a good looking barrel, man.

Right on! Be careful, though, messing with engagement surfaces on trigger components. Sounds like you just smoothed some rough parts, but when you start changing angles, it doesn't always go well.

It's not the casing - it's the powder load.

That pic is almost 4 years old, guys... <lmao>

That robber was NOT expecting that. The Fur Missile whipped his a$s! I hope he ate him once it went into the street. Good Dog!!!

Same F/A that's used on other .308 stuff.

Pair of pliers and a blowtorch. Get medieval on it. DPMS loc-tited that thing on there during assembly. You'll need a good strap wrench and some heat, as well as something to hold the rifle. That's only to get the tube off - the barrel nut will probably have to go, also, so you're gonna need a barrel nut wrench. This will not be an easy fight. Someone made this battle not long ago, and the thread on it is pretty good. Someone will link it in here.

BWAAAAAAHAHAHAHAHAAAAAHAHAHAAAAA!!!!!!

Oh, I'm right here! Talking about Ron's new Elite Iron bipod again? When did he get it?!

HAHA!!! <lmao> Good one, Owl. <thumbsup>

Yep, that's 3 years per stripe, saying he's completed 15 honorable years... I hate people like that. Hate 'em. There's so much $hit wrong with that dude's uniform it's not even funny.

^^^ EXACTLY what I thought!!! EXACTLY!!! <lmao> Gawd Daymit! They made a 300 Win Mag or .338 LM semi!!! WooHoo!!! Hey, wait a minute here... That's a 5.56 mag in there... <laughs>

IF you're specializing in 300BLK, how will you talk to your customers about making their own cases from 5.56 or .223 brass?... It's perfectly safe, and perfectly functional - if you do it right. Do not fear it, brother...

Another BIG one gets the big picture. This is the beginning - or middle, in a way - of a landslide. Beretta to move out of Maryland Published July 22, 2014Associated Press ACCOKEEK, Md. – Beretta U.S.A. announced Tuesday that company concerns over a strict gun-control law enacted in Maryland last year have made it necessary to move its weapons making out of the state to Tennessee. The well-known gun maker said it will move to a new production facility it is building in the Nashville suburb of Gallatin that is set to open in mid-2015. Beretta general manager Jeff Cooper said that a sweeping gun-control measure that was passed last year initially contained provisions that would have prohibited the Italian gun maker from being able to produce, store or even import into Maryland the products that the company sells around the world. While the legislation was changed to remove some of those provisions, Cooper said the possibility that such restrictions could be reinstated left the company worried about maintaining a firearm-making factory in Maryland. "While we had originally planned to use the Tennessee facility for new equipment and for production of new product lines only, we have decided that it is more prudent from the point of view of our future welfare to move the Maryland product lines in their entirety to the new Tennessee facility," Cooper said in a news release announcing the move. The company anticipates the plant in more gun-friendly Tennessee will involve a $45 million investment in building and equipment and employ about 300 people during the next five years. Beretta said it has no plans to relocate its office, administrative and executive support functions from Accokeek, Maryland. "Beretta is one of the world's great companies, and its commitment to excellence and Tennessee's rich history in manufacturing make a great match," Tennessee Gov. Bill Haslam's spokesman Dave Smith said in an email. Maryland Gov. Martin O'Malley pushed for the legislation last year in response to the December 2012 shootings at Sandy Hook Elementary School in Newtown, Connecticut. The law, which went into effect last fall, includes a ban on 45 assault weapons and a limit on gun magazines to 10 bullets. It also contains a variety of other provisions, including a licensing requirement for handgun purchasers to submit fingerprints to the state police. "We're disappointed with this decision, but the common-sense gun safety law we passed, which includes licenses for handgun purchases, is keeping schools, communities and law enforcement personnel safe," said Nina Smith, an O'Malley spokeswoman. Beretta has operated in Italy since 1526. The family-owned company makes a variety of firearms, ranging from hunting shotguns to pistols for the U.S. Armed Forces. Beretta started operations in Maryland in the late 1970s. The plant in Accokeek makes finished pistols from raw materials for the military, law enforcement, and civilian markets. Beretta said the transition from Maryland to Tennessee will be managed so as not to disrupt deliveries to Beretta customers. The company noted that production of the U.S. Armed Forces M9 9 mm Beretta pistol will continue at Accokeek until all current orders from the U.S. Armed Forces have been filled. Cooper said no Maryland employee will be impacted for many months, and the company will meet with employees to discuss their interest in taking a position in Tennessee.

They're functioning just fine through my BLK rifles, brother. No issues whatsoever. As soon as they're shot for the first time, they're fire-formed to the chamber in the rifle, anyway. Don't tell me that you're buying loaded ammo, and not making 300Blk... <dontknow> :eek:

Nope, I'm just "that guy" that keeps wondering about the person that always has to interject or include "in actual combat..." or "In combat, we..." or something like "in sniper training, we..." or "our snipers..." I'm "that guy" that happens to find those that draw attention to themselves. You're one of those people...

That means I'm bringing some 300BLK with my in August!

^^^ Has nothing to do with that. It goes from never shooting 200 yards, to putting down a 2" group at a half mile, on your first home built rifle that is barely finished, and you've just barely shot. Then letting that go on for quite some time. It's about the rapid development of an awesome (unheard of) set of skills, in practically zero time at all.

Larry, please explain to me again, why you're not buying Lottery tickets?... <dontknow> That's AWESOME, brother!!! :hethan:

Case differences between the two - haven't tried too much .223 Rem brass yet. I'm running some Federal American Eagle "M855" brass right now that I don't think I'm going to like that much, as a BLK parent-case. I'll give updated reports on it as time goes by. Your powder charge will probably be different if you're running .223 Rem cases - don't go with the 16.1 grains of H110, under the 150 gr Hornady FMJ BT, off the bat - if you decide to run .223 cases as parent-cases.

I was reading through this thread, and wondering if this was a complete rifle that Armalite shipped to the customer, or if it had been messed with in some way... Anything at all changed from how it was delivered from the factory... Need to know what exactly (and all-inclusively) was changed from the factory rifle. Then, start looking there first...