98Z5V

I like RifleGear, alot - great company. Bought many, many things from them through the years, including my Moss MVP. At the time, very few places had it in stock, and they didn't gouge prices due to it's demand. Good people. I feel for you, wash... <lmao>

Well, I don't need your Canadian piece of schit here, because - wait for it - if I want that stock setup, I'll just get it from ACE Ltd. Don't really give a fuk about your design, it doesn't interest me. Because, I have options. That's something you don't have. I also have SureFire 60-rd mags. Suck on that for a second. Well now, I'm not calling you names, but you're sure representing YOUR country well. Living here, I don't think I'm missing out on much in the firearms realm. Not much at all - LOTS of choices. <thumbsup> That's not much of a skil-test question, IMHO - but if you think that tests skill, then that explains alot about your skills. I'm not even the least bit interested in that ugly T97 - not even a little. I can't have one (nor would I want one) based in the rules/regultions of the ITAR. Use that answer to replace your buttplug. <thumbsup> I don't need to prove schit to you - you're the one here stating how much you know, and how valuable you are. I help plenty of people here, routinely. I've seen your history on other boards - you come on there with your cut-and-paste introduction, just like you did here, talking about how awesome you used to be, and you get a few followers. You never last long on those other boards, though. Most of what you say on those boards isn't relaly helpful - it's just you talking bout you, ll over again. You've lready told your own story of yourself - all over the internet. For years... Tell me again about those 3 R25s you have?... You should really go buy the Costco-sized 5lb tub of Vagisil, and smear yourself down with it real good - your giant vag is VERY inflamed...

You still didn't answer the question - how many R25s do you have? At the start of this thread, you state three? How many do you have? By the way, I don't need to invent a name for a buttstock adapter, claim it as mine, when I can buy it from ACE Ltd.

Can't believe you didn't have the balls to say something. Kinda disappointing. I'll wait here while you try to compose some kind of response. If you don't mind, I'll have a snack.

Come on, LAZ 1, you were just lingering in here for 8 minutes, and you don't have anything to say?... Really?...

I'm smelling maple syrup, bacon, and BULLSCHIT... Laz 1, how many R25s do you have?... Your DPMS rifles are not AR10s, either, no matter how you try to color it. Professional gunsmiters already know this.

Okay, other way around then... <lmao>

Post your question in this section; http://forum.308ar.com/forum/84-class-iii/

Research what they load each load with, and find the one with the best BC. Go with something from Black Hills Ammunition, though. Nobody loads it better, for factory ammo. <thumbsup> If they have a mag-length load with the Hornady 195gr BTHP, run THAT one. :hethan: http://www.hornady.com/store/30-CAL-.308-195-gr-BTHP/ The BC is .550. Hornady manual, 9th Edition, lists COL at 2.800" for it. :banana:

As soon as she reads this, her LEFT thumb will look like that right one... <lmao>

We'll start doing that here - I'll paint the thing P USSY PINK if you want me to... <lmao>

You ARE the Hot Fudge Sunday, brother... :banana:

Black Hills .308 Winchester Match, 175gr Match Hollowpoint. New Ammunition. Not reloaded.

Hey, Lazarus, didn't you sell one of your R25 rifles to some SWAT SNIPER, and turn another one into spare parts? Or am I missing something. You don't still have 3 of them...

And, we have that. On top of everything else, we have that.

What rifle are you using, Spaniky, and what's the barrel twist rate?

You're absolutely right, ss - that won't hit mainstream media news outlets. Thanks for posting that. <thumbsup>

Adam, did you by chance install a disconnector spring in the bolt catch plunger? The two are identical, with the exception that the disconnector spring has it's last coil flared larger. A disconnector spring in the bolt catch plunger can jam up, because of that last coil. Easy way to find out is check your disconnector spring in the trigger group - if it doesn't have a larger coil on the end, then you know where that spring is... <lmao> I'll bet Lazerus already knew that, too...

Interesting point of view - but innacurate. Very disappointing, coming from someone that's supposed to be such an expert, and professional... Wow.

DPMS doesn't make the AR10. Only Armalite makes the AR10. As a PROFESSIONAL gunsmiter, I thought you'd already be aware of that.

Worth a call: http://www.guns-accessories.com/index.php?route=product/product&path=153_157_166&product_id=1787 It almost be worth it to buy another rifle, and strip it down. I've seen several for sale. We'll see what our Canadian SuperHero has to offer...

Need some PROFESSIONAL gunsmiter advice in this thread right here, Superhero. See if you can help our buddy out. It's not an Original Armalite AR10, but you ARE a PROFESSIONAL gunsmiter, and other people paid you $$ to work on their guns. with license and everything. And you did it for over a decade. And, you're glad to offer free advice... Hit this thread and help him out. Live up to your word. <thumbsup>

I'll send him a link to this thread - don't hold your breath, Chase, I'm just sayin'...

That's why I don't let the fatties ride... :rant2:

Bro, you got Head-Spaced... <laughs> :bat: