Belt Fed Posted July 7, 2021 Report Posted July 7, 2021 Just now, Belt Fed said: Hmmmm, coulda been your problem. But probably not and it probably will be a jam nachine. I feel bad for you and will give you 500 for a non working gun right now.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 23 minutes ago, Belt Fed said: But probably not and it probably will be a jam nachine. I feel bad for you and will give you 500 for a non working gun right now. 😂🤣😃 Well, not sure if it was copper or brass but there were 2 decent size chunks smooshed inside the chamber. Let some solvent soak & wire brushed it. Meh, didn't work. Then used a nylon brush & some Iosso paste & scrubbed the fuk out of it. THAT WORKED! Not sure if that was the issue, but damn sure it wasn't good . Gonna get out Saturday & see.
98Z5V Posted July 7, 2021 Report Posted July 7, 2021 11 hours ago, Belt Fed said: Murderer WAY worse than you and HogZilla, right?...
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 10 minutes ago, 98Z5V said: WAY worse than you and HogZilla, right?... 😂🤣 i forgot about that! What a geriatric hypocritical sumbitch!!
98Z5V Posted July 7, 2021 Report Posted July 7, 2021 3 minutes ago, Lonewolf McQuade said: 😂🤣 i forgot about that! What a geriatric hypocritical sumbitch!! I got your back. I got his back, too - depends on where the discussion is going. I'm just trying to keep up the fight...
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 11 minutes ago, 98Z5V said: I got your back. I got his back, too - depends on where the discussion is going. I'm just trying to keep up the fight... 😂😄😅 Much appreciated!
Belt Fed Posted July 7, 2021 Report Posted July 7, 2021 6 hours ago, Lonewolf McQuade said: i forgot about that! Early warning signs of dementia.
Belt Fed Posted July 7, 2021 Report Posted July 7, 2021 6 hours ago, 98Z5V said: WAY worse than you and HogZilla, right?... Well yeah, that was self defense and only one. he done killed a whole pasture full of the poor little creatures. the big bully.
58marine Posted July 7, 2021 Report Posted July 7, 2021 @Lonewolf McQuade Nice picture of the chamber. It looks a little rough. If the problem recurs maybe polishing the chamber could be your fix? Just a thought.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 1 hour ago, 58marine said: @Lonewolf McQuade Nice picture of the chamber. It looks a little rough. If the problem recurs maybe polishing the chamber could be your fix? Just a thought. Thanks. I noticed the tooling marks, wasn't sure if it was that rough or just over pronounced from the magnified close up pic.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 2 hours ago, Belt Fed said: Early warning signs of dementia. What the Hell ever Frank!! Eer, Bob?..I mean Larry. Dammit, who ever you are
58marine Posted July 7, 2021 Report Posted July 7, 2021 Yeah. Someone more knowledgeable than us might be along soon.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 12 minutes ago, 58marine said: Yeah. Someone more knowledgeable than us might be along soon. So hold off with the 80 grit paper and high speed drill? 🤣
58marine Posted July 7, 2021 Report Posted July 7, 2021 3 minutes ago, Lonewolf McQuade said: So hold off with the 80 grit paper and high speed drill? 🤣 You could give it a try. If it don't work out @Belt Fed might still be willing to take it off your hands.
BigNate Posted July 7, 2021 Report Posted July 7, 2021 Long snout die grinder and a carbide burr should get it done…
58marine Posted July 7, 2021 Report Posted July 7, 2021 3 minutes ago, BigNate said: Long snout die grinder and a carbide burr should get it done… @Lonewolf McQuade See, I told you someone more knowledgeable will be along soon. 🤣
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 10 minutes ago, 58marine said: You could give it a try. If it don't work out @Belt Fed might still be willing to take it off your hands. You mean once I have it all egged out to about a 300 Magnum new chamber? LOL
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 9 minutes ago, BigNate said: Long snout die grinder and a carbide burr should get it done… 👍
58marine Posted July 7, 2021 Report Posted July 7, 2021 3 minutes ago, Lonewolf McQuade said: You mean once I have it all egged out to about a 300 Magnum new chamber? LOL Where's the " beer" button?
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 19 minutes ago, 58marine said: Where's the " beer" button? No button here Send keg to: C/O Lonewolf McQuade 30-06 Firing Range Lane Itsascam Pa 54321
58marine Posted July 7, 2021 Report Posted July 7, 2021 2 hours ago, Lonewolf McQuade said: Send keg to: C/O Lonewolf McQuade 30-06 Firing Range Lane Itsascam Pa 54321 Ok. Keg is on its way.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 (edited) Garrett from Armalite returned my call today. Gave him all the details I could. The brass chunks in the chamber obviously could cause problems, along with the carbon marks from possibly gas seeping by, lateral markings etc. I also told him the chamber looked a little rough. He suggested checking the feed ramp for burr, polish if I find any. Also to get a chamber hone to smooth out the chamber. Edited July 7, 2021 by Lonewolf McQuade
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 6 minutes ago, 58marine said: Ok. Keg is on its way. 🤣😂
jtallen83 Posted July 7, 2021 Report Posted July 7, 2021 34 minutes ago, Lonewolf McQuade said: Also to get a chamber hone Try some Flitz on a chamber mop in a drill before you spend big bucks. Worked for me once and others have said the same. Some use a dremel on sharp edges around the feed ramp, I've gotten by with a set of swiss needle files.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 2 minutes ago, jtallen83 said: Try some Flitz on a chamber mop in a drill before you spend big bucks. Worked for me once and others have said the same. Some use a dremel on sharp edges around the feed ramp, I've gotten by with a set of swiss needle files. Thanks @jtallen83
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now