unforgiven Posted July 6, 2021 Report Posted July 6, 2021 4 hours ago, Belt Fed said: Murderer Hahahaha
unforgiven Posted July 6, 2021 Report Posted July 6, 2021 4 hours ago, Lonewolf McQuade said: You look like a groundhog.........hold still Your killing me
unforgiven Posted July 6, 2021 Report Posted July 6, 2021 1 hour ago, Rsquared said: If they're really out of them. Just let me know, I can probably come up with one for you. Don't forget to charge the scissor lift
Lonewolf McQuade Posted July 6, 2021 Author Report Posted July 6, 2021 (edited) 1 hour ago, Rsquared said: If they're really out of them. Just let me know, I can probably come up with one for you. I appreciate that. Still waiting on a call back from Garrett Stephens in the parts repair department. One of the other gentleman I spoke to on the phone said though that the extractor it's supposed to have that chip look to it that is their design. So not sure what the heck's going on yet I was waiting to talk to ArmaLite genius. Did you see the pictures of the Bolt extractor I posted a pager to back? Does that look normal for the Armalite to you? Edited July 6, 2021 by Lonewolf McQuade
Lonewolf McQuade Posted July 6, 2021 Author Report Posted July 6, 2021 (edited) Took some pics with a better camera. Still hard to tell since I can't get the lighting right but extractor may not be chipped, could just be the relief cut Armalite put in the arm. Edited July 6, 2021 by Lonewolf McQuade
Lonewolf McQuade Posted July 6, 2021 Author Report Posted July 6, 2021 (edited) Apart.... Edited July 6, 2021 by Lonewolf McQuade
Lonewolf McQuade Posted July 6, 2021 Author Report Posted July 6, 2021 (edited) Last... Edited July 6, 2021 by Lonewolf McQuade
Belt Fed Posted July 6, 2021 Report Posted July 6, 2021 You use clear nail polish? them nails sure is shiny, clean and purty and all filed up nice and neat.
Matt.Cross Posted July 6, 2021 Report Posted July 6, 2021 11 minutes ago, Belt Fed said: You use clear nail polish? them nails sure is shiny, clean and purty and all filed up nice and neat. Uh, yeah... I got some bad news for you son...
Belt Fed Posted July 6, 2021 Report Posted July 6, 2021 2 minutes ago, Matt.Cross said: Uh, yeah... I got some bad news for you son... i wished my thumb looked like his does now.
Matt.Cross Posted July 7, 2021 Report Posted July 7, 2021 4 minutes ago, Belt Fed said: i wished my thumb looked like his does now.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 Rotton fukers!!🤣 shiny cuz theyre soaked with the motor oil you guy's had me dunk the BCG in. I've become proficient at biting my nails perfectly rounded though 🖕
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 @Belt Fed, when you get a chance, can you check your extractor in the Armalite to see if it looks notched like mine?
Belt Fed Posted July 7, 2021 Report Posted July 7, 2021 6 minutes ago, Lonewolf McQuade said: @Belt Fed, when you get a chance, can you check your extractor in the Armalite to see if it looks notched like mine? yes sir i sure will.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 10 minutes ago, Belt Fed said: yes sir i sure will. Thanks.
Belt Fed Posted July 7, 2021 Report Posted July 7, 2021 Your extractor is normal, mine has it. and i remember years ago me thinkin it was chipped. i done some research and that's the way they came.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 1 minute ago, Belt Fed said: Your extractor is normal, mine has it. and i remember years ago me thinkin it was chipped. i done some research and that's the way they came. Thank you!! So if my extractor isn't fuked, then that leaves either a crusted up chamber or hot load ammo? I'll double check the chamber again, pretty sure it looked good when I checked last. Next outing, I'll take FGMM & see what happens. I didn't notice any sign of pressure with any of the spent brass.
jtallen83 Posted July 7, 2021 Report Posted July 7, 2021 Both my rifle and spare extractor have that notch although the used one is more pronounced. That factory spring set is a bitch getting in when new
Belt Fed Posted July 7, 2021 Report Posted July 7, 2021 Start with post number 17 and then Mrralys post on next page. My New Baby - Page 2 - AR-10 Pictures - 308AR.com Community
Sisco Posted July 7, 2021 Report Posted July 7, 2021 3 minutes ago, jtallen83 said: Both my rifle and spare extractor have that notch although the used one is more pronounced. That factory spring set is a bitch getting in when new Oh yes it is!🤣
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 8 minutes ago, jtallen83 said: Both my rifle and spare extractor have that notch although the used one is more pronounced. That factory spring set is a bitch getting in when new Thanks.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 14 minutes ago, Belt Fed said: Start with post number 17 and then Mrralys post on next page. My New Baby - Page 2 - AR-10 Pictures - 308AR.com Community Great sleuthing skills Rick👍
Rsquared Posted July 7, 2021 Report Posted July 7, 2021 Sorry I wasn't able to get back to you dude. I'm juggling a bunch of $hit these days. I concur with the other brothers. Though not pulling one of mine, I believe that that's what they look like if I remember correctly. Either way, if you feel like you wanna try a new one just to rule it out, I can hook you up.
Lonewolf McQuade Posted July 7, 2021 Author Report Posted July 7, 2021 (edited) 7 minutes ago, Rsquared said: Sorry I wasn't able to get back to you dude. I'm juggling a bunch of $hit these days. I concur with the other brothers. Though not pulling one of mine, I believe that that's what they look like if I remember correctly. Either way, if you feel like you wanna try a new one just to rule it out, I can hook you up. I appreciate the offer, thank you.👍 I'll hold off for now, I did find a chunk of copper stuck in the chamber. Took a little work, but I got it out. Edited July 7, 2021 by Lonewolf McQuade
Belt Fed Posted July 7, 2021 Report Posted July 7, 2021 1 minute ago, Lonewolf McQuade said: I did find a chunk of copper stuck in the chamber Hmmmm, coulda been your problem.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now