hollywood Posted October 12, 2013 Report Posted October 12, 2013 My bolt in my lar-8 is stuck in the upper. The bolt face won't rotate. Help please.
imschur Posted October 12, 2013 Report Posted October 12, 2013 Need to mortar it. in a safe direction bang the stock against the ground while pulling on the charging handle.
BLKSHEEP Posted October 12, 2013 Report Posted October 12, 2013 Need to mortar it. in a safe direction bang the stock against the ground while pulling on the charging handle. Soak it in Kroil then ^^^
hollywood Posted October 12, 2013 Author Report Posted October 12, 2013 Got it. Just tapped the very back of the bolt back with a piece if wood. Then cleaned all of the carbon. All good now thanks.
Robocop1051 Posted October 12, 2013 Report Posted October 12, 2013 (edited) Is it that dirty? You could've also broken down the rifle into two halves, then squirt a big shot of BreakFree or FireClean into the bolt from underneath. It should loosen up whatever carbon is freezing things up within a few minutes. For the future, take a look at the Mecharmor Defense "TacOps-1" ambi charging handle. It's a really solid handle that can take a beating. I had a bad reload stuck in my chamber and was able to dislodge it by pounding the stock downward (mortar style) and hitting the charging handle at the same time. If you're interested, we have an ongoing group buy here on our website. Edited October 12, 2013 by Robocop1051
unforgiven Posted October 12, 2013 Report Posted October 12, 2013 Unless they came out with a different design,they don't fit RRA.I asked when I first got my Tac-ops.
Robocop1051 Posted October 13, 2013 Report Posted October 13, 2013 I forgot this was the bastard-child board.
washguy Posted October 13, 2013 Report Posted October 13, 2013 I forgot this was the bastard-child board. :) Wash
98Z5V Posted October 13, 2013 Report Posted October 13, 2013 I'd like to know what led to this one - OP, still got the brass?
Magwa Posted October 13, 2013 Report Posted October 13, 2013 how well do you lube that bolt carrier group?
Dane Armory Posted October 13, 2013 Report Posted October 13, 2013 how well do you lube that bolt carrier group?If it is not like a scene in a fisting , squirting video it is not wet enough !
hollywood Posted October 13, 2013 Author Report Posted October 13, 2013 Got it. Just tapped the very back of the bolt back with a piece if wood. Then cleaned the small amount of sticky carbon that was on the very back of the inner (rotating) bolt. All good now thanks.
hollywood Posted October 13, 2013 Author Report Posted October 13, 2013 If it is not like a scene in a fisting , squirting video it is not wet enough ! It is going to be from now on. It had only sat for a week or so after letting a friends 13 yr old try it. 5shots. I thougut it was pretty wet but it will be they wet from now on.
planeflyer21 Posted October 13, 2013 Report Posted October 13, 2013 If it is not like a scene in a fisting , squirting video it is not wet enough ! I don't get it. Been watching those videos for close to 3 hours now and don't see any bolts anywhere. Maybe in another few hours.
sketch Posted October 14, 2013 Report Posted October 14, 2013 I don't get it. Been watching those videos for close to 3 hours now and don't see any bolts anywhere. Maybe in another few hours. You might be in the beasty section go down to dominate :)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now