Jump to content
308AR.com Community
  • Visit Aero Precision
  • Visit Brownells
  • Visit EuroOptic
  • Visit Site
  • Visit Beachin Tactical
  • Visit Rainier Arms
  • Visit Ballistic Advantage
  • Visit Palmetto State Armory
  • Visit Cabelas
  • Visit Sportsmans Guide

shooterrex

Specialist
 View Profile  See their activity

  • Posts

    3,357

  • Joined

  • Last visited

 Content Type 

Everything posted by shooterrex

  1. shooterrex
    That is an investment in thumb health.
  2. shooterrex
    You can polish the chamber a bit with something like flitz but you don't want to make it too slick. JB bore paste would also work.
  3. shooterrex
    This is what I use most of the time. The one they make for 7.62x39 also does Grendel and 6 ARC.
  4. shooterrex
  5. shooterrex
    Then you might need to turn the gas down a bit more. That should slow down the cycle and give the brass a bit more time to shrink back down. I can't shoot steel case ammo in my 5.56 pistol because it cycles faster than the steel case shrinks back down for extraction.
  6. shooterrex
    Glad it's running okay now. Yep PSA just doesn't seem to care and we keep telling folks how to fix them. I lucked out with my PA10. I started with a rifle stock and recoil system.
  7. shooterrex
    If it's not extracting how do you know it is locking back on an empty mag? Shoot it with the gas adjustment all the way open. What kind of springs etc are under the extractor?
  8. shooterrex
    I knew you would like that.
  9. shooterrex
  10. shooterrex
  11. shooterrex
    Good to hear it's working for ya.
  12. shooterrex
    I think cdnnsports.com still has those stripped target uppers like the one above. Slick side w/tall rail.
  13. shooterrex
    The only change was a larger gas port and now it runs fine. Must have had enough oil in the first place.
  14. shooterrex
  15. shooterrex
    Welcome from KY
  16. shooterrex
    Higher balastic coefficient. Shoots just a bit flatter than the Grendel. Still shoot my Grendel's more.
  17. shooterrex
    Two of these showed up today. More parts I don't really need but you never know when I decide I need to build something else. Joe Bob's had them for $49 ea and free shipping.
  18. shooterrex
    6ARC is A M4 with a different barrel, magazine and BCG. Actual 1000 yd cartridge in a small platform. Shoots flatter than a 308.
  19. shooterrex
    Welcome from KY
  20. shooterrex
    I have loaded 110gr carbine bullets for my 308 bolt gun for plinking rounds. About 1.5 moa @100yds.
  21. shooterrex
  22. shooterrex
    It runs fine now. Bolt locks back just fine. New scope is on. There is 2- 5 shot groups @ 87 yds. Eld match.
  23. shooterrex
    Yes
  24. shooterrex
    It was very windy and I was shooting off the hood of my jeep without a good rest. Groups were not that good and I didn't even take any pics. There were a couple with bullets touching then a flyer 3" away. If I get a chance this weekend I'll get some groups from sandbags.
  25. shooterrex
    https://www.theamericanmarksman.com/primers.html I haven't bought primers from them but a LOT of ammo.
×
×
  • Create New...