shepp Posted April 13, 2015 Author Report Posted April 13, 2015 You didn't run any of that crappy steel cased MGD through FAT Irma did you? She likes coke
shepp Posted April 13, 2015 Author Report Posted April 13, 2015 (edited) Pop can skeethttps://youtu.be/EvyTCTevMDg Edited April 13, 2015 by shepp
Rsquared Posted April 13, 2015 Report Posted April 13, 2015 You didn't run any of that crappy steel cased MGD through FAT Irma did you? I see what you did there. I ain't taking the bait. <laughs>
washguy Posted April 13, 2015 Report Posted April 13, 2015 After the first shot it wants to reset in the half cocked position so I'm getting a light strike on my second round and no kaboom Shepp....like this? :) Wash https://www.dropbox.com/s/hovjtf2qav4f7qb/20140929_205449.mp4?dl=0
shepp Posted April 14, 2015 Author Report Posted April 14, 2015 Shepp....like this? :) Washhttps://www.dropbox.com/s/hovjtf2qav4f7qb/20140929_205449.mp4?dl=0 YES!!! Contact the Manufacturer yet ? Not yet, I just left phenoix today I'll get in touch with them when I get home. Did my YouTube videos work I posted?? I've never uploaded videos to YouTube before
sketch Posted April 14, 2015 Report Posted April 14, 2015 Vids worked awesome brother nice road trip !! After all the havock those Az. bros cause your lucky to still have chin hairs!
98Z5V Posted April 14, 2015 Report Posted April 14, 2015 Shepp....like this? :) Wash https://www.dropbox.com/s/hovjtf2qav4f7qb/20140929_205449.mp4?dl=0 Almost exactly like that. If you just fired it, first round, it would go. In the cycling of it, it wouldn't catch at the full-cocked position and would stop at the half-cocked position. Second round resulted in it trying to fire from the half-cocked position, and a light primer strike because of that. i ripped into it and found out that you HAD to follow through on the trigger, and make damn sure you held it to the rear after every shot. when you did that, and eased up to reset it, the disconnector wouldn't let go of the hammer - it wouldn't reset. However, follow through, hold it to the rear, give it a nudge forward to reset it, and it would fire the next round perfect. Everytime, if you did that. I think it's the disconnector spring. There's an issue with the disconnector spring. I'll take mine apart tomorrow and get pics - we can work off those, and get shepp to rip his down when he gets back. I'm wondering if they've been building so many, that they forgot the disconnector spring in a few of them. I'm also wondering if it's an issue only on the .308 trigger. My trigger body is a dark grey, and it's the AR15 Match. Shepp's is the AR10, and the body is red. The dude in that link has a red body on his, but I don't think he stated what trigger it was. Might have missed that.
FaRKle! Posted April 14, 2015 Report Posted April 14, 2015 (edited) Check the pull weight adjustment screw. I had an issue with my Elftmann too that required me to watch the installation video on their site to find out what was causing it...If you adjust the trigger pull too light then the disconnector doesn't release (and the trigger won't reset), if you adjust the pull too heavy, then it won't release at all when you pull the trigger. I had mine set too light and ended up having to push the trigger forward after each shot to get it to reset the first time I took it out. Edited April 14, 2015 by FaRKle!
shepp Posted April 14, 2015 Author Report Posted April 14, 2015 I had that issue with my Elftmann too. The problem is you have the trigger pull adjustment too light. I had to watch the installation video on their site to find that out... If you adjust the trigger pull too light then the disconnector releases, if you adjust the pull too heavy, then it won't release at all when you pull the trigger. That very well could be it Farkle I did lighten it up, I'll try tightening it up more and go shoot it....
98Z5V Posted April 14, 2015 Report Posted April 14, 2015 This comes down to the flowchart stuff... I just installed mine and ran it. First question on the flowchart stuff is always "Did you fuk with it?..." <lmao>
shepp Posted April 14, 2015 Author Report Posted April 14, 2015 This comes down to the flowchart stuff... I just installed mine and ran it. First question on the flowchart stuff is always "Did you fuk with it?..." <lmao> I fuked with it :(
washguy Posted April 14, 2015 Report Posted April 14, 2015 image.jpg DNP wish I would have had that flow chart years ago! :) Wash
Malig8r Posted April 15, 2015 Report Posted April 15, 2015 image.jpg Now that is a great flowchart!!!!!
DNP Posted April 15, 2015 Report Posted April 15, 2015 Just another gem from the Internet. That was posted on the wall in the aerial photo lab I worked at back in 99. Before you worked on the machines....you had to run it through the proper check.
shepp Posted April 16, 2015 Author Report Posted April 16, 2015 (edited) Just another gem from the Internet. That was posted on the wall in the aerial photo lab I worked at back in 99. Before you worked on the machines....you had to run it through the proper check.I saved it for future reference Made it home this morning bout 1am Checked out the freedom rock off i80 west of Des Moines last night anyone ever gets thru that area it's only 5 min off the interstate and very moving to say the least Edited April 16, 2015 by shepp
shepp Posted April 17, 2015 Author Report Posted April 17, 2015 (edited) He repaints this one every Memorial Day and plans to have one in every county of Iowa by 2020. Pictures do it zero justice I got choked up looking at it, no reason to, just did..... Edited April 17, 2015 by shepp
ponce Posted April 17, 2015 Report Posted April 17, 2015 He repaints this one every Memorial Day and plans to have one in every county of Iowa by 2020. Pictures do it zero justice I got choked up looking at it, no reason to, just did..... Plenty of reason to get choked up!
98Z5V Posted April 18, 2015 Report Posted April 18, 2015 Research Rocky Versace and Roy Benevidez, via google, and that's plenty of reason to get choked up right there. Those guys are true American Heroes. :hail:
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now