MinnMD66 Posted April 10, 2018 Report Share Posted April 10, 2018 Hello everyone I was just hoping that someone on the forum could help me out with a feed issue that I've been having. As you can see from the pictures, there is a bit of a transition problem between the receiver and the barrel extension feed ramp. My plan is to mill out the material on the receiver area to match the feed ramps and just needed to know if this is a bad idea or not. Quote Link to comment Share on other sites More sharing options...
sketch Posted April 10, 2018 Report Share Posted April 10, 2018 welcome give a few more details for fit and finish.. make and model? this ramp could use some help but is it the real problem? details bro? Quote Link to comment Share on other sites More sharing options...
MinnMD66 Posted April 10, 2018 Author Report Share Posted April 10, 2018 The receiver is aero precision and the barrel is an Anderson. I picked it up used already assembled so I don't know all the details about everything. All I know is the guy said he didn't have any feed issues when i bought it, well low and behold I have feed issues. It seems to be limited to soft points for some reason. They jam to the top of the chamber if that's any help. Quote Link to comment Share on other sites More sharing options...
washguy Posted April 10, 2018 Report Share Posted April 10, 2018 (edited) Min heres some info pics for you..... Edited April 10, 2018 by washguy Quote Link to comment Share on other sites More sharing options...
Matt.Cross Posted April 10, 2018 Report Share Posted April 10, 2018 14 minutes ago, MinnMD66 said: The receiver is aero precision and the barrel is an Anderson. I picked it up used already assembled so I don't know all the details about everything. All I know is the guy said he didn't have any feed issues when i bought it, well low and behold I have feed issues. It seems to be limited to soft points for some reason. They jam to the top of the chamber if that's any help. The nature of the problem is the soft points, not the feed ramps. The short answer is to avoid soft points. Quote Link to comment Share on other sites More sharing options...
MinnMD66 Posted April 10, 2018 Author Report Share Posted April 10, 2018 9 minutes ago, MinnMD66 said: The receiver is aero precision and the barrel is an Anderson. I picked it up used already assembled so I don't know all the details about everything. All I know is the guy said he didn't have any feed issues when i bought it, well low and behold I have feed issues. It seems to be limited to soft points for some reason. They jam to the top of the chamber if that's any help. Oh and this is my first ever Ar build so get ready to pull your hair out Sketch buddy. I'm sure I probably won't make sense on some of this stuff. Quote Link to comment Share on other sites More sharing options...
sketch Posted April 10, 2018 Report Share Posted April 10, 2018 your asking sketch.. to lose his hair. im good bro. take your time . you will be taken care of . details are key! ^^ im here to ask rediclous guestions and mean no malas. I learn everyday! Quote Link to comment Share on other sites More sharing options...
98Z5V Posted April 10, 2018 Report Share Posted April 10, 2018 Dremel Chainsaw Sharpening Bit. In your Dremel. That aluminum receiver will be forced to blend with the barrel extension feed ramps, whether it likes it or not. First, you need this: I'd pick one of the more expensive ones, with variable speed control. Without a doubt. This is the bit you need - this thing makes SHORT WORK of bad feedramp problems... Chainsaw Sharpening Bits.. Let us know how it turns out. Quote Link to comment Share on other sites More sharing options...
edgecrusher Posted April 10, 2018 Report Share Posted April 10, 2018 8 hours ago, Matt.Cross said: The nature of the problem is the soft points, not the feed ramps. The short answer is to avoid soft points. Soft points do not feed well in AR rifles. Quote Link to comment Share on other sites More sharing options...
blue109 Posted July 19, 2018 Report Share Posted July 19, 2018 Would not recommend dremmeling anything to a guy on his first AR build lol. Quote Link to comment Share on other sites More sharing options...
washguy Posted July 19, 2018 Report Share Posted July 19, 2018 Blue raised the posts from the depths of the grave ....Necro brother Blue Wash Quote Link to comment Share on other sites More sharing options...
blue109 Posted July 19, 2018 Report Share Posted July 19, 2018 Lol my bad! I saw OPs recent post and clicked on the user profile and saw this one. Assumed they went up together. Ill call for an exorcism from father Rob Quote Link to comment Share on other sites More sharing options...
DNP Posted July 19, 2018 Report Share Posted July 19, 2018 I'll go get the sage and the candles....brb. Quote Link to comment Share on other sites More sharing options...
mrmackc Posted July 19, 2018 Report Share Posted July 19, 2018 On 4/9/2018 at 10:37 PM, Matt.Cross said: The nature of the problem is the soft points, not the feed ramps. The short answer is to avoid soft points. Yep, ARs don't like dem softees Quote Link to comment Share on other sites More sharing options...
ARTrooper Posted July 19, 2018 Report Share Posted July 19, 2018 4 hours ago, blue109 said: Would not recommend dremmeling anything to a guy on his first AR build lol. Old post or not, I agree with him. I don't trust myself with a dremmel most of the time, would rather send my stuff off to one of the half blind old guys with the shakes. haha. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 19, 2018 Report Share Posted July 19, 2018 14 minutes ago, ARTrooper said: would rather send my stuff off to one of the half blind old guys with the shakes. haha. I'll take that challenge - and I'll attack that thing, straighten your feed ramps out, polish it all out, and have it back on the way to you over the weekend... Quit being scared to work on your guns, guys... Quote Link to comment Share on other sites More sharing options...
Matt.Cross Posted July 19, 2018 Report Share Posted July 19, 2018 6 minutes ago, 98Z5V said: Quit being scared to work on your guns, guys... Save yourself some money, know your limitations! Pay no attention to that guy over on your other shoulder... Quote Link to comment Share on other sites More sharing options...
308kiwi Posted July 19, 2018 Report Share Posted July 19, 2018 (edited) In both of my Aero uppers the barrel extension fits all the way to the inside face of the upper, IE they don't have the transition step that is in the pics MinMD66 posted. (sorry for the crap pic, but hopefully you get what I'm saying). This I believe is possibly the issue that some are having with buffers being chewed up on the front face, if the barrel extension is forward of the face in the receiver then the bolt group is going to be in battery that much further forward, allowing the buffer to also travel that much further forward and contact the retainer. Sorry I don't know how to link this to the other recent psot that someone made about buffer damage. That's my 2 cents worth for today? Edited July 19, 2018 by 308kiwi Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 19, 2018 Report Share Posted July 19, 2018 25 minutes ago, Matt.Cross said: Save yourself some money, know your limitations! Pay no attention to that guy over on your other shoulder... Stop, already. Quit being pus$ys and start cutting some guns up - know what they do, what they're supposed to do, and fix the problems. This will help PSA and Anderson owners, right away. I meant that, just as it sounded. 9 minutes ago, 308kiwi said: In both of my Aero uppers the barrel extension fits all the way to the inside face of the upper, IE they don't have the transition step that is in the pics MinMD66 posted. (sorry for the crap pic, but hopefully you get what I'm saying). Caught that right away. I would think that's a barrel-manufacturing problem, before I'd think it's an Aero-has-issues-making-M5-uppers problem. That's just based on my personal history with Aero Precision products, which is about 4 x 308 guns and probably 15 x small-frame ARs. I seriously need to count these things. Quote Link to comment Share on other sites More sharing options...
308kiwi Posted July 19, 2018 Report Share Posted July 19, 2018 Agreed. Both my 308 upper and my 243 upper, (one is an M5 Aero the other is an M5E Aero), I barrelled using BAT Machine barrel extensions and they both fit flush to the inside face, without MinMD66 pulling the barrel and measuring the distance from the end of the extension to the shoulder that seats against the front of the upper thread we will never know. Quote Link to comment Share on other sites More sharing options...
Matt.Cross Posted July 19, 2018 Report Share Posted July 19, 2018 16 minutes ago, 98Z5V said: Stop, already. Quit being pus$ys and start cutting some guns up - know what they do, what they're supposed to do, and fix the problems. I can't. Everything I build runs like a champ, except for that one lockback issue with the oversized buffer on the MA TEN of course.... and I did fix it but it was too easy. I guess I need to get myself a PSA PA-10 and document the turd polishing process. Quote Link to comment Share on other sites More sharing options...
98Z5V Posted July 19, 2018 Report Share Posted July 19, 2018 (edited) 37 minutes ago, Matt.Cross said: I guess I need to get myself a PSA PA-10 and document the turd polishing process. No need to go that extreme, it's already been done and documented. Be brave, my brother. Dive straight in - right in - to the Anderson Manufacturing thing we're starting to see now. Get into that, my brother. This is so much proof it's not even funny. PSA makes so much high-quality, badass AR15 stuff- because the TDP is out there, and it's a template to follow, and any monkey manufacturer can find the prints and make it. Anderson Manufacturing is the same way, and many times, even cheaper than PSA, in all regards. Anderson kills it with AR15 parts, if you're building your own... BOTH of these manufacturers can't figure out large-frame AR shiit, and one of these manufacturers has even been offered and GIVEN A MAP to get their shiit straight - but it doesn't happen. They don't listen. The other manufacturer in this conversation doesn't even know about this place, and all these fixes, and won't even know that their shiit is all jacked. Clueless. And yet...no matter what... those manufacturers don't have to deal with the problems that they create, in house, in their own manufacturing facilities. They either don't listen, or they DO listen and don't care. It can be nothing else but those two things. It just can't. They BOTH have no clue that people have serious issues with the functionality of their large-frame weapons, and those people DON'T call the manufacturer - THOSE PEOPLE hop online, to this message board (that they find), and proceed to give us hell about the weapon that they bought. Somehow, more often than not, they tell US that we're the bad guys for telling them they need to spend more money to fix the shiit they were sold. WE are the bad guys. Know where that comes from, PSA and Anderson? YOU sold the cheapest platform that you could, and it's jacked, and the mentality comes out. "I spent SO much money on this, and it doesn't WORK!!! IT SHOULD WORK FOR WHAT I SPENT!!!" I really want to tell them this, right here, and I'm not kidding... IF YOU WANTED IT TO WORK, OUT OF THE BOX, THEN BUY A FUCKING LaRue!!! Mark LaRue doesn't send shiit rifles out of his place of business. What's really fucked up is this - If I went out and bought a 100% DPMS LR-308 rifle, from individual parts, from DPMS - each part - and I build that thing... it WILL work. Armalite is zero questions, it'll work. I can't say that if I buy all the parts from PSA, and now Anderson. I can't say that. It won't fucking work. So, PSA, you been doing this for quite awhile, and I actually respect your ambitions. Fix your shiit. Not for me - I won't ever own one. Fix it for your future customers, and fix it for the real, no-shiit lifetime guarantee that you offer. Fix it for YOU, and your bottom line. You mean well, and you're doing well - and your Lifetime Guarantee will bite you right in your a$s of you don't fix the problems you have in your recoil system, and your gas system - they're linked, directly, in case that hasn't been figured out yet. I'll clue you in - THEY'RE DIRECTLY LINKED. Now, for Anderson Manufacturing - get out of the large-frame AR business. Just leave. You crush AR15-platform shiit - you kill it, and you're good at it. Jumping into large-frame AR shiit is over your head. WAY over your head. You have done zero research on this, you have never seen the problems inherent in this platform, and you don't even care. Just fucking go, and stop trying. Or, wake up, realize what the issues are (it's gonna take you years to figure this out, and MUCH research), and fix it... That's my opinion, and you can suck it if you think I'm wrong. I'm living your world, and living your shiit products (both you companies), and people don't research your problems before they buy your cheapass platforms. Then they come here, and get all beligerent about the problems they have when we tell them that we're tired of seeing it. We get blamed for the shiit that you can't figure out. PSA, you've already been given the map to success. You ignored it. Anderson - figure it out quick, and fix it, or remain lumped into this category. Tom-Ass out. Edited July 19, 2018 by 98Z5V Quote Link to comment Share on other sites More sharing options...
Matt.Cross Posted July 19, 2018 Report Share Posted July 19, 2018 12 minutes ago, 98Z5V said: Dive straight in - right in - to the Anderson Manufacturing thing we're starting to see now. Get into that, my brother. In the machining business we have a term for the kind of product that Anderson's large ARs typify; "scrap"! My only use for it is to recycle it and make something useful out of the recycled metal. My beef with this sub-par crap being sold is that some poor tool somewhere will stake his life on the one POS he could find that fit his budget, and it will fail him in his time of need. Don't sell junk that doesn't work, doesn't get any more simple than that. Quote Link to comment Share on other sites More sharing options...
survivalshop Posted July 19, 2018 Report Share Posted July 19, 2018 Whats that word for long winded answers? Starts with a "L " , 98 ? Quote Link to comment Share on other sites More sharing options...
survivalshop Posted July 19, 2018 Report Share Posted July 19, 2018 (edited) I blend & polish all my Feed Ramps . I don't think 308s even touch the feed ramps on the Receiver . ( For some reason 'Edit ' wasn't working ) Now it works on this post , man ,I hear Twilit Zone music . Edited July 19, 2018 by survivalshop Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.