RedRiverII Posted July 27, 2019 Report Posted July 27, 2019 I'd like to organize my rapidly growing supply of parts in an orderly fashion. The cardboard box indexing is a horror show. The single magnetic pan is overflowing and... Anyone here have a neat system? Pics would be appreciated. Thank you in advance.
shooterrex Posted July 27, 2019 Report Posted July 27, 2019 Get a cheap tackle box for the small parts.
RedRiverII Posted July 27, 2019 Author Report Posted July 27, 2019 Very appropriate shooterrex, thank you.
MikedaddyH Posted July 27, 2019 Report Posted July 27, 2019 Large ''Tupperware'' totes, shoebox size plastic boxes and flat Harbor Freight parts bins (12" x16"). Stackable and portable.
Belt Fed Posted July 27, 2019 Report Posted July 27, 2019 I don't have nothing really organized, tackle boxes and tool boxes a drawers full of stuff. Have a couple more drawers full of old parts not pictured.
edgecrusher Posted July 27, 2019 Report Posted July 27, 2019 2 hours ago, Cunuckgaucho said: I use the same Dewalt tool organizers
Cunuckgaucho Posted July 27, 2019 Report Posted July 27, 2019 2 hours ago, Belt Fed said: Now that is some organization skills. There are only so many trips to the store I was going to make to buy something I knew I have but can't find well at least until I got back from shopping. Workshop isn't big enough(is it ever?) so this is more necessary then anything else. It works for gun stuff,electrical/electronic stuff and general hardware. 21 minutes ago, edgecrusher said: I use the same Dewalt tool organizers Best deal for me is on Amazon so on smaller orders I'll throw another deWalt case on.
Cunuckgaucho Posted July 27, 2019 Report Posted July 27, 2019 https://www.itstactical.com/warcom/accessories/ar-15-spare-parts-organization-schematic-for-the-obsessive-compulsive/
RedRiverII Posted July 27, 2019 Author Report Posted July 27, 2019 First let me get this out, Canuckgaucho says "There are only so many trips to the store I was going to make to buy something I knew I have but can't find well at least until I got back from shopping." That is some serious truth there podna'. I had to laugh it's so true. The next thing is some of those displays are so neat it's scary. Actually good job, well done. I forgot about those tray boxes. I see some serious effort involved, thank you sir. I started to build the 6.5cm and sent some small pins flying. That forced me to start digging around the PILE, which did not help the foul mood the flying pin caused. 95 degrees in the garage and yada yada I'm ready to get serious, as serious as you were and are. Off to the store.
98Z5V Posted July 28, 2019 Report Posted July 28, 2019 We posted about this years ago, it was a thread that @mrraley started, about a portable gunsmith box. I offered to give away my whole box to the guy that could identify every single part in it... Not a chance that was happening... Plano 732 fishing tackle box. Current shot of it. That's just the gunsmith box. The Range Box is way bigger, and alot different.
RedRiverII Posted July 28, 2019 Author Report Posted July 28, 2019 Very cool Z. Here is my current system, not including one metal cabinet or the two hanging cabinets.
RedRiverII Posted July 28, 2019 Author Report Posted July 28, 2019 Bless me Father for I have messed up. The two brownish bags on the 3x3 table are small Colt SAA screws and parts.
Cunuckgaucho Posted July 28, 2019 Report Posted July 28, 2019 6 hours ago, RedRiverII said: Bless me Father for I have messed up. The two brownish bags on the 3x3 table are small Colt SAA screws and parts.
RedRiverII Posted July 28, 2019 Author Report Posted July 28, 2019 @Rquared, might I ask where the inspiration came from for this admirable, and fine example of extreme tidiness? @Cunuckgaucho, that's funny and drill instructoresque.
Rsquared Posted July 28, 2019 Report Posted July 28, 2019 Oh that was easy. I simply got tired of my stuff being a total train wreck and laying around everywhere.
RedRiverII Posted July 29, 2019 Author Report Posted July 29, 2019 Even your current post number is neat 6,666
98Z5V Posted July 30, 2019 Report Posted July 30, 2019 7 hours ago, RedRiverII said: Even your current post number is neat 6,666 That right there tells the whole story... Am I wrong here?...
sketch Posted July 30, 2019 Report Posted July 30, 2019 (edited) gotta love a true story! Edited July 30, 2019 by sketch good shits.
Belt Fed Posted July 30, 2019 Report Posted July 30, 2019 On 7/27/2019 at 7:30 PM, 98Z5V said: We posted about this years ago, it was a thread that @mrraley started, about a portable gunsmith box. I offered to give away my whole box to the guy that could identify every single part in it... Not a chance that was happening... Plano 732 fishing tackle box. Current shot of it. That's just the gunsmith box. The Range Box is way bigger, and alot different. Nice, but where's the 308ar.com sticker?😜
Rsquared Posted July 31, 2019 Report Posted July 31, 2019 On 7/29/2019 at 6:05 PM, RedRiverII said: Even your current post number is neat 6,666 21 hours ago, 98Z5V said: That right there tells the whole story... Am I wrong here?... You're one to talk fuker.
98Z5V Posted July 31, 2019 Report Posted July 31, 2019 17 hours ago, Belt Fed said: Nice, but where's the 308ar.com sticker?😜 I had that box before the stickers - so now I have to find the damn pack of stickers Neil sent me, and fix that problem!...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now