shooterrex

It is ok not great. I was just watching 2 rabbits @ about 100 yds. Going to Alabama at the end of the week to shoot some hogs. This is the cheapest thermal Scope ATN sells. It does a better job than the first gen ATN it scope I have. Pretty easy to see what the dogs are barking at without messing with IR lights.

Welcome from KY.

If you use a 6" black square and shoot at 1 corner 6X should be enough.

Welcome from KY.

The slide is heavy because those guns are straight blow back.

If it works with a captive recoil system I'd be surprised. Not many folks having any luck with those.

Welcome from KY.

I have a 10mm. I have factory ammo. I will load the gun myself. I'm not shooting his ammo NOPE.

I'll shoot it. But I'm bringing my own 10mm ammo.

Daytona doesn't have the best reputation.

I want to see the body cam footage.

Probably tech problems. There are guns for sale but no parts right now.

My 2 PSA uppers only fit PSA lowers without modification. You would also need to change out the gas tube to a proper length gas tube. You would also need to change out the recoil system to a proper weight buffer and a proper spring. I did not have to change the PSA's recoil system on the rifle lower I bought. Carbine lowers are a different matter. You might also check out Bear Creek Arsenal. Their stuff fits DPMS lowers.

I've got in AK on 223 that throws brass 25 to 30 feet.

8 to 10 feet is about right.

That's what you call staying in the fight.

Welcome from KY.

If your full length dies don't chamber right then get the small base dies. Also I recommend the Lee factory crimp die.

My 16" Balastic Advantage 308 doesn't have an adjustable gas block. It runs just fine. Unless you are running a suppressor you shouldn't need an adjustable gas block.