shooterrex

How is the eye relief? Most folks are having to mount their scope a little more forward. I have had good luck with the Athlon scope mounts. https://athlonoptics.com/product/armor-cantilever-mounts-30mm/

Stopped in at Rural King today. While in the gun section I saw that they had 9mm ar pistols. Ask if they knew the ATF just declared them SBR's since they had braces. I was told because they were 9mm they weren't AR's and the SBR thing didn't apply. Here is a corporation that doesn't understand the new rules and will probably loose their FFL over this $hit.

Welcome from KY.

A lot of 308ar's ding the case mouth on ejection. Pretty normal.

A numbered drill bit set is the easiest way to check your gas port size.

Bought a Thor Lt Thermal scope. Focus is a little picky. Not at all like regular nite vision. Got it sighted in at 35 yds on a 5.55. Only 3x6 power but it should do yotes around here. Was able to sight it in by just using a sharpie on a cardboard box.

Search out the waterboarding thread and read and answer those questions. All you really told us is your rifle doesn't work. How are we supposed to help you when we dont have the gun in front of us and we have no idea what components are present. You might also drop by the introduction thread and introduce yourself.

I have 3 guns that shoot this ammo real well. https://www.theamericanmarksman.com/bullets-1st-762-175-gr-m118-lr--400-ct.html

Good job on the gun and the yote.

New gun. Soak the BCG in mobile one overnight. What size is the gas port? My Wilson Creedmoor barrel had to have the gas port opened a bit for the gun to run right.

https://www.theamericanmarksman.com/bullets-1st-762-175-gr-m118-lr--400-ct.html

My friend from work brought his new Stag 308 out to the farm. With about 50 rounds through it l had it shooting under 1 moa w/M118 175 gr.

Welcome from KY.

My 16" does good farther than that. My 6.5 Creedmoor is 16" too and I know it does 850 yds.

Also since you don't have a bunch of rounds through it soak the BCG overnight in mobile one. If the bolt is real stiff going in and out of the BCG lube should help.

Soak the BCG in mobile one overnight.

Waiting on the FedEx man.

Did someone say hogs? The new ATN thermal scope should be here tomorrow.

I use Varget and BL-C(2). That lets me load 5.56 & 308 with both powders.

Glad you're doing better.

I just clamp a scope mount across the upper and rail till I get the rail tight.