shooterrex

Someone is making ammo for the 500BO.

Merry Christmas all.

I do know Breakfree CLP also doesn't freeze @15 below.

A muzzle brake will do more for recoil than a fancy buffer that doesn't work well on these large frame guns.

To shoot distance a 34mm tube gives you more adjustment than a 30mm.

One time the website wouldn't take an order. I tried 3 days calling several times a day before I got someone to answer the phone. They didnt even know the website was messed up.

If those are going in a semiautomatic rifle you should probably use the Lee factory crimp die too. If the bullets set back in the case the pressures go through the roof.

I bought a couple AR-15 lowers last week @ a decent size gun/outdoor store. They had 4 different people check the paperwork before they rang me up. They are worried about simple mistakes on the paperwork getting them in trouble. Anderson lowers for $38.00. not building anything now but working lowers for that price. Couldn't pass it up.

Yes I'm using heavier bullets. Your lighter ones will be fine w/those numbers w/Varget.

If it ran ok with the factory trigger and it doesn't now it's the trigger. Try pulling the bolt back and releasing it while you hold the trigger back at the same time. This will check and see if the disconnector is working properly.

I shoot 24.5 gr of Varget w/69gr sierra hpb match bullets. Nice accurate load. Also have a friend that shoots the same bullet @ 25 gr.

Slow down. Just change 1 thing at a time. You ordered a longer gas tube. Good. Your buffer even with tungsten will not be heavy enough unless the body is made of stainless steel. Armalite sells the entire carbine recoil system for about $75.00. This works. The recoil system also has to deal with the mass of the BCG going rearward not just feeding the next round.

Do you have pics of what you are talking about? Not really understanding what you are trying to describe.

Bet your gas port is too small.

Must be an epidemic.

I have used the pins over again. Just use the proper size roll pin punch.

Or stick a screwdriver through the holes in the muzzle device.

I had the same length gas tube on my PSA. The gun did run. I replaced the gas tube w/the Armalite 308 carbine gas tube anyway. It comes just past the middle of the cam cut out.

If this is a new gun is the Bolt Carrier Group soaked with oil? When you load only 1 round does it lock the bolt back on an empty magazine? Get us the info from the waterboarding thread.

Sounds like a plan. Just remember all the stupid rules on braced pistols they are getting ready to jam down our throats.