jtallen83

The LaRue trigger lineup is expanding; https://www.larue.com/products/larue-tactical-mbt-2s-straight-bow-trigger/#panel1

Welcome from Iowa, via Missouri!

I use stainless steel coiled roll pins. They are stronger AND drive much easier. I get mine from a Texas seller off Ebay and never had an issue; https://www.ebay.com/itm/162085837963?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

Welcome from Iowa, via Missouri!

Welcome from Iowa, via Missouri!

Welcome from Iowa, via Missouri!

Not all but most. DPMS LR308 patterns and AR-10 will be the same. Piston rifles and the scaled down platforms may be different. I am not familiar with the LMT but betting someone here will know for sure, if not then you will be the source on that question ?

Nice looking stick! Are you set up for a suppressor?

Welcome from Iowa, via Missouri!

Excellent sign that tolerances are tight! My Armalite cam pin was like that when new, a few hundred rounds and it was much easier, still tight but easier. I need to get a couple of those Acme's ordered before the price goes up.

People make fun of HiPoint but they are apparently SOLID in build and warranty!

Planning the next one yet?

That's the reason my wife gave for wanting one. She was hitting a two inch steel disc at 15 yards and fell in love with mine. Subsonics with a suppressor are just a giggle fest, it is the new most requested "pistol" when I make range trips with the grandkids.

Watch a guy on youtube that just did a review on the BBBBrightttt, said it was outstanding.

Read this thread for a little clarity on the buffer tube/buffer issue. I think you have an Armalite AR-15 carbine tube.

That is a rifle buffer, it will never allow the rifle to cycle with a carbine tube. Are you sure the Armalite carbine buffer tube is on the left? If it is I have to wonder what length that PSA tube is?????? @98Z5V

Shark fishing anyone? @The Wizard Keep searching GunBroker, I see them there occasionally, like a couple times a year.

On sale again for $49.99.

That leaves me out, I would want both testicles and I'm a jerk!

Looking forward to that, one hell of a reputation to live up to!

Kick arse company! Sent them my DD214 last night, they refunded 10% from the order I made last week and that order already had a $5 discount for being my first order

Haven’t worn jeans since the mid 90’s, hell I only own three pair of pants. For real comfort give overalls a try ?

That looks delicious! I will for sure watch for it, maybe my local beer pusher can locate some.

There needs to be some criteria set down for these “long distance records “. Repeatability needs to be worked into the formula, not taking away from this mans skills but one hit at two miles is not near as impressive to me as hitting the bullseye repeatedly at a 1,000 yards. Even a blind squirrel can occasionally find an acorn.

Hard to go wrong with this lapping tool. I have used both the AR-15 and the big brother with good results, required nothing more than my cordless drill, upper receiver vise blocks, and vise. Used the lapping compound from my scope ring lapping kit. They are limited in usable life depending on how rough the receivers you lap are. http://pacifictoolandgauge.com/ar-tools/1139-ar-15-upper-receiver-lapping-tool.html Loctite 609 for mating the extension and the receiver. https://tdsna.henkel.com/NA/UT/HNAUTTDS.nsf/web/3E906D6B842166B0882571870000D855/$File/609-EN.pdf