shooterrex

Welcome from KY.

Does that fsb have set screws on the bottom. The one I am sending requires pins that go through the edge of the barrel. I'm not sure where the original pins got to and do you have a way of drilling the pin slots in the edge of the barrel. If this isn't something you want to do. Let me know before I get this shipped and I'll send back your money.

https://www.armalite.com/SACItem.aspx?Item=AR10REKIT01&ReturnURL=/Armalite/Product-Category/AR10-Parts-Accessories&Category=4eeff98b-d9a6-40fd-be6b-ab2e44ec1080 Your buffer is to light.

Pm sent

If you want a fsb that has the adjustable front sight and normal sling swivel. I have one off the PSA when I changed the barrel and went to a rail.$20 shipped 3/4" barrel diam.

These systems are not designed to be worked by hand slowly. If you do a search here. You will see that almost everyone that has some type of fancy buffer/spring has feeding and cycling problems till they take those parts out and replace them with tried and true setups. The dremmil bits for sharpening chainsaws work well for extending the feed ramps on the upper.

Do you still have the JP buffer system in the gun? If so go back to the rifle buffer and spring you first used. What you are seeing could be caused by the bolt traveli g to fast. The original rifle buffer and spring will slow that down and give the magazine time to raise the round all the way.

They make stupid rules and someone finds a way to work around them.

You probably had something under the trigger. A blown primer is the usual suspect.

https://www.armalite.com/SACItem.aspx?Item=AR10REKIT01&ReturnURL=/Armalite/Product-Category/AR10-Parts-Accessories&Category=4eeff98b-d9a6-40fd-be6b-ab2e44ec1080 This will fix your recoil system.. You will also probably need to change your gas system to function suppressed. Get the rifle running 100% first then mess w/the can.

And 09/11/2012. 4 Americans died and the government told troops not to go to their aid.

Looks nice. Bet it will be fun to shoot.

That is my understanding. The bolt headspaces to the barrel extension. The extension is installed before the gas port is drilled so it indexes straight up. The chamber is behind( in front of) the barrel extension. They MIGHT be able to take a chamber reamer and take a bit more material out of the chamber. I would send the bolt and barrel back to the maker. They might have a bolt that head spaces correctly without changing anything. What did the brass look like that you fired?

∆∆∆∆∆ What he said. Works every time

The only way to fix the headspace is send the barrel and bolt back to Faxon.

That is Wilson's own length gas tube. I am going through that with a barrel I bought from them. Optics Planet is supposed to have a couple in stock. The one you want is 13.25". Wilson is out of stock at the moment.

Read the fine print. Wilson barrel showed up. I thought it used a midlength gas tube. But NO is uses something between midlength and rifle length. 13.25" Wilson is out of stock. Optics Planet supposedly has 3. Last time I ordered something from them that was " in stock" I was told the next day 2-3 months. I ordered it we will see.

https://www.bearcreekarsenal.com/bca-223-5-56-nato-300-blackout-side-charging-bolt-carrier-group These people have them on a regular basis. Out of stock at the moment.

Wilson is on it . Already @ UPS ETA is Friday.

So True