Sisco Posted February 14, 2017 Report Posted February 14, 2017 16 minutes ago, shepp said: Looks just like the velocity meters they sell in the parts houses around here for the HVAC guys Probably is they just triple the price for us know nothings.
shepp Posted February 14, 2017 Report Posted February 14, 2017 2 minutes ago, Sisco said: Probably is they just triple the price for us know nothings. Probably not I'm always showing them tools on Amazon telling them they can do better
sketch Posted February 15, 2017 Report Posted February 15, 2017 Im a sweetheart yes you are self! You deserve a nice gift for being my self! Oh how sweet am i?! This: ?http://www.springfield-armory.com/products/xdm-4-5-full-size-45acp-threaded-barrel/ dont forget to chk the gear up banner at the top!
shepp Posted February 15, 2017 Report Posted February 15, 2017 32 minutes ago, sketch said: Im a sweetheart yes you are self! You deserve a nice gift for being my self! Oh how sweet am i?! This: ?http://www.springfield-armory.com/products/xdm-4-5-full-size-45acp-threaded-barrel/ dont forget to chk the gear up banner at the top! NICE!!
Sisco Posted February 15, 2017 Report Posted February 15, 2017 (edited) What can are you going to put on it? Edited February 15, 2017 by Sisco
sketch Posted February 15, 2017 Report Posted February 15, 2017 Im in reserch mode... there is a can in mind that works with the .458 and .45 but reviews are questionable.. and might just be dreaming for over the counter tranactions on a can..? I need a bigger safe!!
Rsquared Posted February 15, 2017 Report Posted February 15, 2017 And remember. Cans are like Chinese food. Once you get the first one, an hour later you'll want another one.
sketch Posted February 15, 2017 Report Posted February 15, 2017 Im starving for my last order brother!! Damn nfatake to fucking long basterd!!
shepp Posted February 16, 2017 Report Posted February 16, 2017 .45 oly upper finally came it needed a signature, was labeled to come Monday so I left the delivery guy a note telling him when I get home, and a signiture and print of my name too. Monday he reads that at 3:17 Tuesday he comes back, at wait for it 3:15?!? Yesterday he shows up 15 min before the earliest I noted I'd be at home then on his lil note marks it final delivery but not where to get my package, so I'm freaking out.......emailed UPS and they were very helpful. pictures to come
Sisco Posted February 16, 2017 Report Posted February 16, 2017 Nice. I was looking at a 45acp complete Oly AR at the LGS yesterday. I got to admit I was tempted.
shepp Posted February 16, 2017 Report Posted February 16, 2017 1 hour ago, sketch said: that happend quick? It'll get its own lower that's my lower from my .556 dissy
jtallen83 Posted February 17, 2017 Report Posted February 17, 2017 200 rounds of GRIZZLY CARTRIDGE 300 AAC BLACKOUT 220GR HARD CAST LRN SUB-SONIC , hope it functions in the pistol! http://palmettostatearmory.com/grizzly-cartridge-300-aac-blackout-220gr-hard-cast-lrn-sub-sonic-ammunition-20rds-gc300bl-r2.html
sketch Posted February 18, 2017 Report Posted February 18, 2017 2 hours ago, jtallen83 said: 200 rounds of GRIZZLY CARTRIDGE 300 AAC BLACKOUT 220GR HARD CAST LRN SUB-SONIC , hope it functions in the pistol! http://palmettostatearmory.com/grizzly-cartridge-300-aac-blackout-220gr-hard-cast-lrn-sub-sonic-ammunition-20rds-gc300bl-r2.html I tried this ammo in my pistola and rifle a few months ago and it went bang for sum and the most of 20 rnds failed to feed. I brought them back to the lgs and returned the 84/100 he figures i have a tight chamber. Ive shot everything else even my own relodes just fine. Keep us posted?? I should have posted my results but forgot to. Hope it works for you jt. The few that poped were very quiet and hit clays at 100yds.
jtallen83 Posted February 18, 2017 Report Posted February 18, 2017 1 hour ago, sketch said: I tried this ammo in my pistola and rifle a few months ago and it went bang for sum and the most of 20 rnds failed to feed. I brought them back to the lgs and returned the 84/100 he figures i have a tight chamber. Did the bolt just not lock up or did the round nose hang up on the feed ramps?
sketch Posted February 18, 2017 Report Posted February 18, 2017 Sholder stuck in the chamber. I had to mortar it many time with several rnds. Bolt was about 1/2" from closed.
jtallen83 Posted February 18, 2017 Report Posted February 18, 2017 Looks like I better run it through a case gauge before I even try it.
sketch Posted February 22, 2017 Report Posted February 22, 2017 Heavier than i expected at first but load up a mag and its just right! Balance that is! Damn 13 is tough on the finger tips! Came w/ 3 mags! And the other 4 are up for grabs along with other bits!!
planeflyer21 Posted February 22, 2017 Report Posted February 22, 2017 5 hours ago, sketch said: Heavier than i expected at first but load up a mag and its just right! Balance that is! Damn 13 is tough on the finger tips! Came w/ 3 mags! And the other 4 are up for grabs along with other bits!! You can fix how that trigger feels. Lots of the competition XDM guys like Springer Precision: http://www.springerprecision.com More and more are switching to the trigger I put in mine, Powder River Precision (PRP): http://powderriverprecision.com
Morgan Posted February 22, 2017 Report Posted February 22, 2017 My new scope is in! My new scope is in! I pick it up on March 4th or 5th, as time permits from a minimum of 200 miles or 300 miles away. But it will be mine, ALL mine! Newest and latest P-308 by Nikon. Been on order since Jan 2nd.
sketch Posted February 22, 2017 Report Posted February 22, 2017 6 hours ago, planeflyer21 said: You can fix how that trigger feels. Lots of the competition XDM guys like Springer Precision: http://www.springerprecision.com More and more are switching to the trigger I put in mine, Powder River Precision (PRP): http://powderriverprecision.com Thanks jon ill check it out!
george_995 Posted February 23, 2017 Report Posted February 23, 2017 Luth AR mba-3 it's going on my rpr.
guilliam Posted February 24, 2017 Report Posted February 24, 2017 http://www.vikingtactics.com/product-p/vtac-mk2-ug.htm?1=1&CartID=0 ordered a new two point sling, I never owned or used a VTAC sling .... so it' an experiment.
sketch Posted February 24, 2017 Report Posted February 24, 2017 51 minutes ago, guilliam said: http://www.vikingtactics.com/product-p/vtac-mk2-ug.htm?1=1&CartID=0 ordered a new two point sling, I never owned or used a VTAC sling .... so it' an experiment. When your done with that one try our site sponsor beachintactical! Banner is at the top of the page. He does custom work if you give him a pm! well worth a custom sling that is cost efective and functional!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now