jtallen83 Posted December 29, 2018 Report Posted December 29, 2018 9 hours ago, 98Z5V said: Get one of these while you still can, brother Done, had some Dvor bucks to burn so another bargain!
jtallen83 Posted January 6, 2019 Report Posted January 6, 2019 Two PSA 5.56 Nitride MPI Full-Auto Bolt Carrier Groups, had them on the daily deal for $49.99 this morning. Wish I would have grabbed a couple more before they were out of stock.
unforgiven Posted January 6, 2019 Report Posted January 6, 2019 That was a great deal brother after the remodel I need to build up some play money.
Sisco Posted January 12, 2019 Report Posted January 12, 2019 https://www.classicfirearms.com/ati-gsg-m1911-22lr-pistol-gerg2210m1911/
Sisco Posted January 12, 2019 Report Posted January 12, 2019 (edited) 15 minutes ago, 98Z5V said: Damn, those things are nice! I have heard good things about them. Will do a full review after I get it and take it to the range Edited January 12, 2019 by Sisco
98Z5V Posted January 12, 2019 Report Posted January 12, 2019 1 minute ago, Sisco said: I have heard good things about them. Will do a full review after I get it and take it to the range I've held them and fondled them, but have never shot them. I've been very, very close a few times to picking one up - interested in your review.
edgecrusher Posted January 12, 2019 Report Posted January 12, 2019 (edited) Me too. Debating between this now (thanks!) and a slide swap like Kimber or Ed Brown. I have a gsg -5 and runs like a top Edited January 12, 2019 by edgecrusher Trump made me do it
Sisco Posted January 13, 2019 Report Posted January 13, 2019 22 hours ago, 98Z5V said: I've held them and fondled them, but have never shot them. I've been very, very close a few times to picking one up - interested in your review. https://www.thetruthaboutguns.com/2012/03/joe-grine/gun-review-german-sport-guns-gsg-1911-22/
jtallen83 Posted January 13, 2019 Report Posted January 13, 2019 Looks like I will be building a bench pig on the Matrix receiver set I have in the drawer. Ran across this barrel on ebay, haggled a bit and got it for $145 shipped. Guy had built a rifle for his daughter to hunt with but it was too heavy for her to use, ya think!?! Said it has 20 rounds off the bench and from our communication and his feedback I tend to believe him. It will be a beast but I've been wanting a bull barrel for bench rest shooting. He said it has a "custom" brake installed, hard to tell exactly what it is from the pictures but since I will be running a suppressor it will be a parts drawer brake for me. Great time of year to get second hand items with people trying to pay those credit card bills from Christmas https://ballisticadvantage.com/20-inch-308-bull-rifle-ss-premium-barrel.html
filthy phil Posted January 13, 2019 Report Posted January 13, 2019 This decent stuff? 50c ea at brownells
98Z5V Posted January 13, 2019 Report Posted January 13, 2019 Yes, and the brass is great for reloading.
dpete Posted January 13, 2019 Report Posted January 13, 2019 2 500 ct packs of these little buggers https://www.midsouthshooterssupply.com/item/001532276c500/22-caliber-point224-diameter-62-grain-bthp-with-cannelure-500-count I'm going to see if they shoot any better than 55 gr FMJ out of my 20" barreled coyote AR15
98Z5V Posted January 14, 2019 Report Posted January 14, 2019 High heat Vietnam Tiger Stripe stencils... Get ready for this one...
98Z5V Posted January 14, 2019 Report Posted January 14, 2019 Searched all kinds of high-dollar places, and found high-dollar stencil sets. I gave up on the high-dollar stuff, and started searching cheap, and found a place on Etsy. No joke. Castle Tactical LLC. https://www.etsy.com/shop/CastleTacticalLLC?ref=l2-shopheader-name
edgecrusher Posted January 14, 2019 Report Posted January 14, 2019 7 hours ago, 98Z5V said: Searched all kinds of high-dollar places, and found high-dollar stencil sets. I gave up on the high-dollar stuff, and started searching cheap, and found a place on Etsy. No joke. Castle Tactical LLC. https://www.etsy.com/shop/CastleTacticalLLC?ref=l2-shopheader-name I see they have Kryptek
DNP Posted January 14, 2019 Report Posted January 14, 2019 (edited) so those are vinyl decals. 1 use each. You just buy a bunch and lay them out on the rifle. I've seen it done a few times, but never tried it. If I ever get things straightened out house wise, I still have my cutter here. Edited January 14, 2019 by DNP
edgecrusher Posted January 14, 2019 Report Posted January 14, 2019 Another G Code holster. This will be for the Glock 34/p80 build and it’ll clip right into the belt I have from them
ARTrooper Posted January 14, 2019 Report Posted January 14, 2019 10 hours ago, 98Z5V said: Searched all kinds of high-dollar places, and found high-dollar stencil sets. I gave up on the high-dollar stuff, and started searching cheap, and found a place on Etsy. No joke. Castle Tactical LLC. https://www.etsy.com/shop/CastleTacticalLLC?ref=l2-shopheader-name you going to paint my 260 build when I come down for the spring shoot? ?
DNP Posted January 14, 2019 Report Posted January 14, 2019 They painted guns at his place last fall...mostly rattle can...and pretty much all Mike. He might have some gold leftover.
Matt.Cross Posted January 14, 2019 Report Posted January 14, 2019 3 minutes ago, DNP said: They painted guns at his place last fall...mostly rattle can...and pretty much all Mike. He might have some gold leftover. Gold? That's not gold, that's "Dollar General Platinum Yellow".
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now