Offical 300 BLK Picture Thread

[shooterrex]

The extension has O rings that grip the inside of the BCG.

 

[BrianK]

I'm not going to check it now, but if I remember correctly the hinge part also has a retention detent that protrudes when the hinge is swung open preventing the BCG extension from coming out. It's fairly bulletproof. Just don't push the actuator button when it's swung open 'cause that's how the extension comes out for disassembly.

[sketch]

On 1/19/2023 at 7:34 AM, JMJ said:

I like the way you think!
 

So what’s the consensus here on the Law Tactical folding adapter?I’ve thought about it for this pistol lower, but I don’t get warm fuzzy feelings about the spacer that slips into the rear of the BCG. Definitely a chunk of change for something that I haven’t been able to check out in person around here. 

To address the actual as I re read, you have to give a significant pull to remove the plunger. I've had zero problems with this kit on a hike in a backpack.  

Edited January 21, 2023 by sketch
Commas mean shits

[JMJ]

On 1/21/2023 at 12:05 AM, sketch said:

To address the actual as I re read, you have to give a significant pull to remove the plunger. I've had zero problems with this kit on a hike in a backpack.  

Thanks for that info @sketch!

[BrianK]

Whoops! Disregard what I wrote above. I have the Sylvan Arms folder and not the Law Tac'. Mind fart on full display.

[sketch]

1 hour ago, BrianK said:

Whoops! Disregard what I wrote above. I have the Sylvan Arms folder and not the Law Tac'. Mind fart on full display.

I have a sylvan arms also (possibly 2) and it is not worth the money. The aluminum is weak,   and does not keep the lock stalk from folding under sling tension. Tested for 6 months. Or less. 

[BrianK]

Good to know. I'll start looking for a replacement.

[jtallen83]

On 1/25/2023 at 12:09 AM, sketch said:

not worth the money.

Thank you for the info Brother, that explains the sale prices.

[JMJ]

On 1/25/2023 at 12:09 AM, sketch said:

I have a sylvan arms also (possibly 2) and it is not worth the money. The aluminum is weak,   and does not keep the lock stalk from folding under sling tension. Tested for 6 months. Or less. 

Also good to know, I came really close to picking one of those up last summer. Only thing that held me back at the time was that I didn’t like how the main portion of the Sylvan didn’t butt up against the receiver like the Law unit does. 

[jwb47]

I have a few 300 blackout's . 4 to be exact . Remington 700 arc-sd , mini-14 300 blackout , smith and Wesson 16 inch carbine and an 8.5 inch pistol I put together with a cmmg barrel and all the rest was stuff I had laying around with the exception of my yhm phantom suppressor it lives on several different gun's 

 

[sketch]

Nice collection 🍻

[BrianK]

Dittos.

[jwb47]

17 hours ago, sketch said:

Nice collection 🍻

Thank you 

[sketch]

[sketch]

I'm throwing it in the trash tonight.  I can't wear a sling without it folding under no pressure.  It worked for like I said 6 months. Not worth it! 

[98Z5V]

Only way to go, brother, is the Law Tactical.  It's pricey, but it doesn't do that.  

[unforgiven]

At least you didn't get hurt with that device brother.

[BrianK]

Yeah, that's what I'd call it too. Unfortunately I have one. 😄 The price was right, now I know why.

[shooterrex]

I have 2 . One on a Grendel and one on a 308. So far so good. I will keep an eye on them.

[AngelDeVille]

  Only two flat tops are this and my .308

Edited April 9, 2023 by AngelDeVille

[BrianK]

When I get some cash I'll pick up a replacement and put the other on a far less critical item. But since I'm far from a hard user of any of my firearms it'll probably work fine for me. I'll still get the replacement though.

A'D'V', What is it about your flattop that is so appealing to my eyes? Maybe the fore end? Anyway, nice!

[308USK]

Still working to dial in the gas/buffer for subsonic ammo (whilst I wait for my suppressor to be set free [lol]), but supersonic ammo runs like a champ!

Parts list:
Spikes Tactical Viking lower
Spikes Tactical M4 upper
CMMG ambi-safety selector
Strike Industries ambi-magazine release
Strike Industries Extended Bolt Catch
Radian Raptor-LT charging handle
Toolcraft 5.56 BCG (DLC)
Strike Industries 10" M-Lok handguard
Rosco Mfg 10.5" Bloodline pistol length gas 300BO barrel
Superlative Arms .750 Adjustable Gas Block
JPSCS2-15H2 buffer spring
Geissele SSA-E trigger
Magpul K2+ grip
Magpul M-Lok AFG
Magpul stock with buffer tube
SureFire M640-DFT-Pro light
Unity Axon SL switch with M-Lok mounting kit
Sig Sauer Romeo 4XT-Pro red-dot optic
Sig Sauer Juliette 3x Magnifier
Multicam Black cerakote (ColoradoKote did the work)

@98Z5V pics for now (LOL)

[98Z5V]

YES!!!   

You didn't tell me it was a Rosco Manufacturing barrel - they make GREAT barrels!

1 hour ago, 308USK said:

Toolcraft 5.56 BCG (DLC)

I was ready to grab 2 of these in 6.5 Grendel last week, but the DLC versions were out of stock.   The only ones I could get were the nitrided ones, and I know they work...   but I'm wanting a DLC coated BCG pretty bad, to see how they run.  In the meantime, I'll live vicariously through you...  

[308USK]

On 2/14/2024 at 9:20 PM, 98Z5V said:

YES!!!   

You didn't tell me it was a Rosco Manufacturing barrel - they make GREAT barrels!

I was ready to grab 2 of these in 6.5 Grendel last week, but the DLC versions were out of stock.   The only ones I could get were the nitrided ones, and I know they work...   but I'm wanting a DLC coated BCG pretty bad, to see how they run.  In the meantime, I'll live vicariously through you...  

LOL

My Toolcraft 5.56 DLC BCG is pretty nice; have a little wear showing (very small amount), but that could be due to the light lubrication on my first run @ the range (thought my gun lube bottle was more full than it actually was, so I only had a wee bit to lube up high-friction places).  Since then, I have made sure I put some MilTec1 on before I go to the range (lol).

[Rsquared]

That's a good lookin rifle there. I'm a fan of 300 BLK too.

Well done sir. It gets the official R2 seal of approval.