Jump to content
308AR.com Community
  • Visit Aero Precision
  • Visit Brownells
  • Visit EuroOptic
  • Visit Site
  • Visit Beachin Tactical
  • Visit Rainier Arms
  • Visit Ballistic Advantage
  • Visit Palmetto State Armory
  • Visit Cabelas
  • Visit Sportsmans Guide

Recommended Posts

Posted

Sisco      " Found a six position carbine buffer and spring used for $10 at a gun show "    ya think that maybe this could be your problem?:laffs:   Wash

  • Replies 495
  • Created
  • Last Reply

Top Posters In This Topic

Posted
24 minutes ago, washguy said:

Sisco      " Found a six position carbine buffer and spring used for $10 at a gun show "    ya think that maybe this could be your problem?:laffs:   Wash

Maybe, but it is in excellent shape. I am going to fiddle with it and see if I can make it work before picking up a new buffer/spring. That will be an option though. When I pull the charging handle back manually on an empty slide, it will not catch, so it has to be a clearance problem, not a lack of energy to pull the bolt back. It cycles beautifully. 

Posted

Havent looked at it in detail since I got home. Was too damn cold at the range to get into it. Will check it tomorrow and get back to you on that.

Posted
44 minutes ago, Sisco said:

Havent looked at it in detail since I got home. Was too damn cold at the range to get into it. Will check it tomorrow and get back to you on that.

GD heat wave down here 

Posted
14 minutes ago, shepp said:

GD heat wave down here 

It was 40 degrees, but a wind gusting up to 45 made it cold. Just felt good to get out to the range. First time since surgery on my ankle.

Posted
3 hours ago, blue109 said:

So you are saying it wont lock back if you pull the charging handle back and manually activate the bolt catch?

No it doesn’t. I will get into it tomorrow, but I think I have the buffer tube screwed in one turn too many. If not I will do some troubleshooting and see. 

Posted (edited)

Try Kauai, my favorite island. Absolutely beautiful. This is the Queens bath. 28 people have died here from going in when the waves are bad.

F240FA21-61DB-4594-B73E-5EF8C79D0CC7.jpeg

Edited by Sisco
Posted
27 minutes ago, unforgiven said:

I got Oregon Montana and Alaska left to see. Never enough time or money to see all the cool stuff.

oregon coast is cool check out the dunes.

montana is where do you stop! 

get lost in ak! but be sure to know where your going?

Posted
6 hours ago, unforgiven said:

I got Oregon Montana and Alaska left to see. Never enough time or money to see all the cool stuff.

All three are really nice, and Magwa’s Idaho is right up there. Wife is making noises about moving back there.

Posted
On 11/28/2017 at 1:32 PM, Sisco said:

Tried it out at the range today with some M855 green tip. It ran flawlessly except it would not lock back on an empty magazine. I only had one magazine with, so I will have to see what happens with a different one, but I am guessing the BCG is going back far enough to chamber, but not quite far enough to lock open. Any quick fixes? Thinking I might try unscrewing the buffer tube one turn and retightening the stock ring to see if that allows it.

Had screwed the buffer tube too far-in. Backed off one turn, Was still enough to hold the detente pin and spring down. Reassembled and it now holds the bolt back-on both the bolt catch and an empty magazine.

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...