1500VHO Posted March 4, 2021 Report Posted March 4, 2021 Well based on 98Z5V and his excellent articles... Tungsten buffer weights, an Orange Spring from Sprinco, a Sheridan 308 case gauge with cut out for reloading and last but not least a RCBS Small based die set... And lots of bullets....
edgecrusher Posted March 4, 2021 Report Posted March 4, 2021 6 hours ago, wwlefty said: I'm trying to finish a x39 build I started a while back so I ordered a Young MFG. BCG, a velocity steel case trigger, an H2 buffer, tube and spring, ambi safety and a BCM pistol grip so I put the hurt on the CC too. I'll be damned if I can find any 30rd mags. though, I heard duramags were the only way to go in 7.62x39. Any other magazine options that you guys had good luck with? C Products worked great in my Colt sporter
wwlefty Posted March 5, 2021 Report Posted March 5, 2021 11 hours ago, edgecrusher said: C Products worked great in my Colt sporter yeah I just cant' find any in a 30rd
wwlefty Posted March 6, 2021 Report Posted March 6, 2021 21 hours ago, sketch said: id invest in 10 rnd mags just buyin new. That's what I did, I bought two 10rds for now
wwlefty Posted March 11, 2021 Report Posted March 11, 2021 I got an aero precision M5 blemished upper off their website. Just couldn't bring myself to pull the trigger on the lower yet. Being broke is just so inconvenient sometimes lol
DNP Posted March 11, 2021 Report Posted March 11, 2021 Don’t worry man, sprinklings of biden money is on the way. Not bad for $2000 checks the first week of his presidency. What? They aren’t 2k? And he’s been in office for almost 2 months now? Damn republicans must be tying up the works trying to get crazy stuff thrown into that bill.
Albroswift Posted March 13, 2021 Report Posted March 13, 2021 Brother has a ar15 build going on, most components when available aren't that bad, but $144 for a Toolcraft bcg... Holy moly. Last 308 build got a NiB toolcraft for less then that. A while back they were going for 69 bucks, doubled in price. No 49 dollar sig barrels left (except on my top shelf!) so we went with a Spikes 14.5 lightweight 1:7 chrome and going to pin a faxon slim 3 port on it. Anderson stripped uppers still around 50 bucks, think i got a couple for 34 dollars a while back but 50 ain't that bad. Forgot how much fun/ quick/easy building ARs are after spending a year ++ building 3 1911s! We should have most of the parts next few days, think he is milling the receiver this weekend. Also got 1000 rounds of 62 gr bullets coming got the press set up and a bunch of RP brass ready to run through the sizer. I think someone is going to find out about the ammo shortage about 1 min after twisting on the optics!
98Z5V Posted March 13, 2021 Report Posted March 13, 2021 2 hours ago, Albroswift said: I think someone is going to find out about the ammo shortage about 1 min after twisting on the optics! Damn right!...
billymagg Posted March 13, 2021 Report Posted March 13, 2021 On 3/10/2021 at 8:33 PM, wwlefty said: I got an aero precision M5 blemished upper off their website. Just couldn't bring myself to pull the trigger on the lower yet. Being broke is just so inconvenient sometimes lol Hey, you're in the People's Republic of Central Obamastan, I know you're enjoying paying a full buck more for every gallon of gas that JB snitzker sells ya, I sure am...
wwlefty Posted March 14, 2021 Report Posted March 14, 2021 17 hours ago, billymagg said: Hey, you're in the People's Republic of Central Obamastan, I know you're enjoying paying a full buck more for every gallon of gas that JB snitzker sells ya, I sure am... Yeah they snuck that gas tax in there at the first of the year, I bought enough farm fuel for this year back in the summer. I also bought 400 gallons of gasoline for the wife at the same time for $1.82 but it's almost gone now
billymagg Posted March 14, 2021 Report Posted March 14, 2021 (edited) 6 hours ago, wwlefty said: Yeah they snuck that gas tax in there at the first of the year, I bought enough farm fuel for this year back in the summer. I also bought 400 gallons of gasoline for the wife at the same time for $1.82 but it's almost gone now My big tractor has starter issues, and the fuel distributer has a stripped bleed screw that leaks,,, fortunately my little John Deere with a bucket sips fuel, only has a 6 gallon tank. We cash rent our small tillable acres, so I buy most fuel in town in a 5 gallon jerry can, I probably use more to get my brush pile fires started, lol.. last year I had to shut my rifle range down when the corn started getting tall.. I did score another 60 rounds of Winchester xm-80 at Walmart, surprisingly enough.. on a less encouraging note, the local gun hack had a few boxes of 9 mm and 45 hollow point, I though man! turned the box over and 59.99 for 20 rounds,, 😠!!!!! Edited March 14, 2021 by billymagg
cwouscg Posted March 15, 2021 Report Posted March 15, 2021 Got my .308 Go-NoGo gages from Brownells today, got the correct rifle length tubes yesterday. Have the trigger on the way and due tomorrow from Larue s II should have everything to commence the build!
Rsquared Posted March 16, 2021 Report Posted March 16, 2021 Sshhhhh. Don't tell Tom. It'll make his head explode. I finally ordered the PRI stuff needed for my MK12 build. Handguard, front/rear sights, PEQ top rail. Keep this amongst ourselves.
98Z5V Posted March 16, 2021 Report Posted March 16, 2021 1 hour ago, Rsquared said: Sshhhhh. Don't tell Tom. It'll make his head explode. I finally ordered the PRI stuff needed for my MK12 build. Handguard, front/rear sights, PEQ top rail. Keep this amongst ourselves. OKay, I'm with you, brother - I'll make sure he doesn't find out!... Pssssh,.,,
shooterrex Posted March 16, 2021 Report Posted March 16, 2021 Bought a new scope for the creedmoor. Moving the one on the creedmoor to the 6mm ARC Pistol
Lonewolf McQuade Posted March 16, 2021 Report Posted March 16, 2021 15 minutes ago, shooterrex said: Bought a new scope for the creedmoor. Moving the one on the creedmoor to the 6mm ARC Pistol Good price for a FFP, especially with an illuminated reticle 👍
98Z5V Posted March 16, 2021 Report Posted March 16, 2021 33 minutes ago, shooterrex said: Bought a new scope for the creedmoor. Moving the one on the creedmoor to the 6mm ARC Pistol You're gonna love it. What mount?
shooterrex Posted March 16, 2021 Report Posted March 16, 2021 Looking for another nikon. They seem to hold up ok.
Sisco Posted March 16, 2021 Report Posted March 16, 2021 3 of these 1-4x variable Simmons Whitetail Classics from Optics Planet for some close range rifles to replace iron sights. Time to accept that I have old eyes. Did not want to break the bank and these are just the ticket.
Lonewolf McQuade Posted March 16, 2021 Report Posted March 16, 2021 1 minute ago, Sisco said: 3 of these 1-4x variable Simmons Whitetail Classics from Optics Planet for some close range rifles to replace iron sights. Time to accept that I have old eyes. Did not want to break the bank and these are just the ticket. Should fit the need perfectly
shooterrex Posted March 23, 2021 Report Posted March 23, 2021 On 3/15/2021 at 11:16 PM, shooterrex said: Bought a new scope for the creedmoor. Moving the one on the creedmoor to the 6mm ARC Pistol Got the scope mounted and almost sighted in. Banging steel at 275 yds.
Drew Eckhardt Posted March 23, 2021 Report Posted March 23, 2021 (edited) A 5.3 oz 308 carbine buffer, Springco orange spring, and SLR Rifleworks Sentry 8 adjustable gas block. With a 3.7 oz 2.5" buffer, AR Stoner spring measuring 11 1/2" with 28 .074" coils, .100" gas port, and proper AR-10 rifle length gas on my 20" barrel I'm under-buffered leading to bolt-over-base malfunctions running a DPMS magazine with longer feed lips than my ASC magazine which works reliably. The extra 5/8" of receiver behind the pistol grip made an A2 stock way too long, so I took my first shots using a CTR stock on a 7" milspec extension set to A1 length of pull two notches in. In the process, I learned about large frame AR gas and recoil system balance. Gas system is correct Krieger M4 barrel ramps with Aero Precision "rifle" receiver would be OK on a small AR Edited March 23, 2021 by Drew Eckhardt
Belt Fed Posted March 23, 2021 Report Posted March 23, 2021 5 30 round Grendel mags and 5 30 round Valkyrie mags.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now